Pb 30 Shot Permitted Type Internal

Powerblast Exploder will not charge if the connected circuit has higher resistance then recommended, or the circuit is open.

Powerblast Exploder does not fire till the rated output is attained, when the firing switch is pressed.

Powerblast Exploder is provided with low battery indicator which gives warning that the battery is low and gets internally locked till the battery is replaced or charged.

First check the instrument by inserting the key and turning it clockwise for the condition of the battery."L" indicates low battery and dot (.) indicates that the exploder is " ON "

Connect the external circuit leads to the exploder output terminals.

By turning the inserted key clockwise the letter "C" will appear on the dial indicating that the circuit is In order.

Keep the key in clockwise position until the letter "F" start flashing.

Press firing switch to explode.

Insert operating key and turn clockwise to 60, the Exploder will indicate "C" & then "F" starts flashing when full charge is attained. Press firing switch to explode

Replace OR charge battery for 16 hours continuously when low battery indicator starts flashing

The capacity of the Exploder may be tested by special powerblast Exploder tester.

We are majorly looking queries from Africa, Australia and America.