Pb 200 Dynamo Condenser Type

Tested by the Central Mining And Research Station Dhanbad as per IS 9836-1981

Powerblast Exploder has inbuilt circuit Continuity tester

Powerblast Exploder Is provided with charging meter to indicate the charge developed when the generator handle Is rotated

PowerblastExploder gets internally discharged when the generator handle is removed from the flange

Powerblast Exploder will discharged internally if the firing is to be cancelled by turning the operating key to the "OFF" position

Powerblast Exploder is very compact and has high impact plastic moulded body

Connect shot firing cable to the Exploder output terminals. insert handle in to the generator flange and rotate. If the detonator circuit has proper continuity, the continuity test indicator will glow. If It does not glow remove handle and check detonator circuits.

Press firing switch to explode when the pointer of the charging meter goes to the red scale.

If the firing is to be cancelled remove handle from the generator flange, and the condenser of the Exploder will discharge internally.

The Exploder is put on a solid base and the generator handle is rotated for charging and circuit continuity testing.

Firing switch Is pressed to explode when charging meter pointer is on the red scale and the continuity tester indicator Is glowing.

Keep Exploder in dry place.

The Capacity of the Powerblast Exploder may be tested by the specially made Exploder Powerblast Tester. The Exploder Needs no special maintenance.

We are majorly looking queries from Africa, Australia and America.