Pb-30 Shot Permitted Type Exploder

Backed by rich industrial experience, we are able to manufacture, export and supply our clients an excellent quality PB-30 Shot Permitted Type Exploder. The exploder provided by us is primarily used for carrying out mixing, blasting, loading and explosive handling in coal mines. This exploder is made available in max. circuit resistance of 160 Ohms with cable and firing current of 1.2 Amps. Our offered PB-30 Shot Permitted Type Exploder is precisely manufactured under the guidance our vendors team of diligent professionals using quality approved components and progressive techniques in conformity with set international standards. Features: Powerblast Exploder will not charge if the connected circuit has higher resistance then recommended, or the circuit is open Powerblast Exploder does not fire till the rated output is attained, when the firing switch is pressed Powerblast Exploder is provided with low battery indicator which gives warning that the battery is low and gets internally locked till the battery is replaced or charged Powerblast Exploder will discharged internally If the firing is to be cancelled by turning the operating key to the "OFF" position Powerblast Exploder Is very compact and has high impact plastic moulded body Technical Specification: Max. Circuit Resistance 160 Ohms with cable Firing Current 1.2 Amps. Energy 1.21 Ws Firing Tension 510 Volts. Duration of Firing Current < 4 ms at 160 Ohms Circuit Resistance Continuity Sensing Voltage & Current Open Circuit Voltage - 5 Volts Short Circuit Current - 5 Ma Max. Batteries AA Type Alkaline / NI-CD / NI-MH /LI-ION with minimum 700 Mah capacity. (6 Nos.) Working Temperature -20 to +55 degree celsius Height 180 mm Width 95 mm Weight 2 Kgs. Approx. Length 155 mm