Digital Electronic Permitted Type Exploder

• POWERBLAST Exploder will not charge if the connected circuit has higher resistance then recommended, or the circuit is open.

• POWERBLAST Exploder does not fire till the rated output is attained, when the firing switch is pressed.

• POWERBLAST Exploder is provided with low battery indicator which gives warning that the battery is low and gets internally locked till the battery is replaced or charged.

• POWERBLAST Exploder will discharged internally If the firing is to be cancelled by turning the operating key to the "OFF" position.

• POWERBLAST Exploder Is very compact and has high impact plastic moulded body.

• First check the instrument by inserting the key and turning it clockwise for the condition of the battery."L" indicates low battery and dot indicates that the exploder is "ON"

• Connect the external circuit leads to the exploder output terminals.

• By turning the inserted key clockwise the letter "C" will appear on the dial indicating that the circuit is In order.

• Keep the key in clockwise position until the letter "F" start flashing.

• Press firing switch to explode.

• If for some reason firing has to be cancelled, simply turn the key anticlockwise to the "OFF" position.

• Insert operating key and turn clockwise to 60, the Exploder will indicate "C" & then "F" starts flashing when full charge is attained. Press firing switch to explode

• Replace OR charge battery for 16 hours continuously when low battery indicator starts flashing

• Keep Exploder in dry place

The capacity of the Exploder may be tested by special POWERBLAST Exploder tester.