Installation Guidelines For Pe Pipes

Loaded with rich industrial experience and expertise,we have emerged as a superior supplier and trader of a wide gamut of Installation Guidelines for PE Pipes. These are widely useful in potable water distribution network & rising main, house service connections, and so on. In order to satisfy our clients by offering them best in class Installation Guidelines for PE Pipes, we are associated with some of the most trusted vendors of the industry. Range 20(0.5") to 2000 mm (80")Pressure rating 2.5 to 25 kgf/cm Standards : ISO-4427 Length Available in straight lengths of 6/12 meters for all sizes and in coils upto 140 mm OD size. Material Grades PE - 80 & PE100(Blue Colour) PE - 80 & PE 100 (Black With Blue Stripes) Applications Potable Water Distribution Network & Rising Main. House Service Connections. Advantages Manufactured from HD/MD PE-80 and PE-100 grade blue compounded material, having WRAS certification, specially made for making pipes conveying potable water supply - recommended world over for distribution of potable water under sanitary conditions hence very safe for potable water distribution network and house service connection. Very smooth inner surface ensures no scaling and choking. Has less friction loss and gives better flow at lower heads. Easy to transport and store as the pipes available in 100, 200 and 300 metre coils. No wastage of pipe as it can be cut to requirement at site. Less number of joint as the pipe is flexible. 100% leak-proof saving enormous quantity of water wasted in conventional piping system due to corroded leaky joints. Easy to repair as the pipes are flexible and joiners are with union type joints. Easy tapping with specialty tapping joints. Tools-off installation possible with precision made fittings. Manufacture MDPE - HSC pipes with PE -80 grade raw material of prime quality from internationally renowned suppliers. PE - 80 grade Polyethylene is a versatile and Internationally accepted material for even Gas distribution piping systems. Material Properties Property Method of Test Units Standard Values Melt flow rate ISO 1133 Gms/10 minutes +30% from the value specifiedby raw material manufacturer Elognation at break after weathering ISO 6259-1 & 3 % 350 Thermal Stability ISO/TR 10837 Minutes 20 Min MRS at 20 C ISO 1133 MPa 8 Hydrostatic Design Stress ISO/TR 9080 MPa 6.3 Longitudinal reversion ISO 2505-1 % < 3