Inflator (Have Light)

We are manufacturing and exporting Inflator (Have Light).
1.Insert cigarette lighter of inflator into cigarette lighter socket,or clip car positive and negative electrode by crocodile clip,pay attention to not inverse(red is positive electrode,black is negative electrode )
2.Start the engine open the switch
3.Connect the air cock to tire valve directly when inflating
4.Note the dial indicators of pressure gauge when inflating,turn off the switch after up to the rated value,pull the air cock(air pressure rated value usually is 28-35PSI)

Tire sealant instructions
1a First find how many holes on the tire ,check how much tire sealant probably need.
2a Remove the tire valve to the location of the clockwise 4 or 8.
3a Shake the tire sealant fully,rotate the nut,cut off the top of bottle appropriate place.
4a Remove the valve needle with valve core removal, put the mouth of bottle into tire valve,then,squeeze the bottle,pull the liquid into tire.
5a Screw the needle of valve on,blow up the tire.Turn the tire running 2 minutes.
6a After pressure test up to normal,it can be automatically repaired.We can drive safely.
Valve core removal instructions
1.Rotate the tire valve cap off
2.Use the valve core removal aim to tire valve and insert into it,then rotate until valve core off.
Screwdriver instructions
Use the special end of screwdriver aim to the top of the screw,fixate,then start to rotate handle
Tire repair knife instructions
Used for cut the extra seal after repair tire.