Industrial Pump (No Light)

We are manufacturing and exporting Pump (No Light) to our clients.
1.Insert cigarette lighter of inflator into cigarette lighter socket,or clip car positive and negative electrode by crocodile clip,pay attention to not inverse(red is positive electrode,black is negative electrode )
2.Start the engine open the switch
3.Connect the air cock to tire valve directly when inflating
4.Note the dial indicators of pressure gauge when inflating,turn off the switch after up to the rated value,pull the air cock(air pressure rated value usually is 28-35PSI)
Tire sealant instructions
1a First find how many holes on the tire ,check how much tire sealant probably need.
2a Remove the tire valve to the location of the clockwise 4 or 8.
3a Shake the tire sealant fully,rotate the nut,cut off the top of bottle appropriate place.
4a Remove the valve needle with valve core removal, put the mouth of bottle into tire valve,then,squeeze the bottle,pull the liquid into tire.
5a Screw the needle of valve on,blow up the tire.Turn the tire running 2 minutes.
6a After pressure test up to normal,it can be automatically repaired.We can drive safely.
Valve core removal instructions
1.Rotate the tire valve cap off
2.Use the valve core removal aim to tire valve and insert into it,then rotate until valve core off.
Tire repair tools instruction :
1.Use a spray bottle to confirm the repair site, mark it.
2.Remove the prickled part with tire repair tools by inserting it through the hole of the prickled part.