H Series Automatic Transfer Switch

H Series Automatic Transfer Switch has a logic control board, different logic commands to control the operation of the gear-motor directly assembled in the switch to ensure the position of the switch. The gear motor is made of neoprene to insulate wetness and heat, has a safety device. It will trip off when the temperature is over 110A C and when it is under over current status, when the trouble is disappear, then device will automatically resumes its work, the reversible reduction gear adopts straight tooth gear.

About The operation : when the key is under automatic starts, this kind ATS will self-input and self-recovering, once the hand is emergency operation, It'll return back after
delay time about 60s Through terminal is 102. 103 To force remote control turn to"0" Position. Optimum selection of switches 202. 204. Emergency manual operation, to use the hand turn the 90A at each position.

REGULATE INSTRUCTION :
When use operating handle, operated switch on/off three times, it should be operated neatly. Full-automatic regulation: discharge handle, connect with relative line, start electric lock, turn on common and reserve power, the switch should transfer to "I" position, then cut off common power, the switch should transfer to "II" position; turn on common power again, the switch should transfer to "I" position back.