Fume Chamber - 8x5x2.5 Feet Dimensions, 6mm Thick Frp Bisphenol "A" Resin Construction, 1000/1200 Cfm Suction Capacity, Automatic Concealed Door System, Acid-resistant Flooring, Dynamic Frp Impeller, Centrifugal Exhaust Blower, 1 H.p. Motor

We are remarkable entity, who offer superior assortment of Fume chamber.

Material of Construction:
6mm thick asbestos lined FRP Bispheonl "A" fumerate resin rein forced with veneer ply sheet 12 mm thick. External laminated with melamine sheet.

Door:
Single, automatic, concealed type balanced with counter weights, sash weights, wire rope and others.

Motor: 1 H.P. 1440 RPM, three phase motor

Ducting: Fume Cupboard
200MM dia thick, rigid PVC pipe of height 8' will be provided with suitable rain hood.

Impeller: Dynamically balanced FRP impeller. Buffed by 3 mm thick FRP sheet.

Exhaust blower: Centrifugal dulvin type, in-built

Casting: 6 mm thick FRP Bisphenol "A" fumerate resin.

Temperature: Max 120'C pressure 2" swg

Suction: 1000/1200 cfm per minute.

Balancing: By suitable equipment upto 3000 RPM

Bottom Arrangement:
3' Height table made out of 19mm black board with sliding door, open door and one number horizontal partition internally coated with epoxy paint.

Flooring: Working surface shall be floored with spartek tiles with acid resistant cement joints.

Electrical Arrangement:
2 Nos of 3 pin 15/5 amp socket, with control switch and bush type starter will be provided.

Overall Dimension Approx.: 8 X 5 X 2.5 Feet

Power Supply: 230 Volts 50 Hz Ac Main 3 Wire System.