Fingerprint Access Control Standalone Portland Pozzolana Cement

We are an eminent organization, engaged in manufacturing, exporting and supplying Fingerprint Access Control Standalone. These products are precisely designed with highly accurate fingerprint scanner which is capable of storing up to 2200 template and 50000 transactions. These products consists of audio-visual indications and can operate without a computer. Our products are very reliable and can support 50 time zones, 5 groups and 10 unlock combinations. These products are widely appreciated in the market as the response time of Fingerprint Access Control Standalone is 1 second.

Features:

• Fingerprint reader with durable and highly accurate optical sensor

• 1-touch 1-second employee recognition

• Capacity to store 2200 template and 50000 transactions

• No need to enter PINs

• Supports 50 time zones, 5 groups and 10 unlock combinations

• Tamper-proofs switch and alarm outputs

• Request-to-exit and alarm contacts

• Operates stand-alone without a computer

• TCP/IP, serial and Wiegand interfaces

• Real-time 1-touch data export to 3rd party hosted & non-hosted applications

• Audio-Visual indications for acceptance & rejection of valid and invalid fingerprints

• SDK available for OEM customers and software developers

Specification:

• Wiegand 26bits/ Wiegand34bits /ABA Standard Format Data Output
• Less than 0.2 second Response Speed
• Less than 0.5 seconds Proximity Time Distance:
• 2-15cm Proximity Range
• Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) or Mifare 1 Card (13.56 MHz Frequency)
• -25 to 75 Ambient Temperature,10%-90% Ambient Humidity
• Built-in Antenna
• Built-in LED (Double Color LED)
• Built-in Loud Speaker (Buzzer)
• DC 12V Working Voltage,70mA Working Current
• 100 Meters Communication Distance
• Real Time Data Transfer
• Black Color
• PVC Case Material (Black Resin for Water-Proof Function)
• 124mm X 76mm X 23.5mm

Installation
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection
Red        DC 5V-16V
Black       GND
Blue         D1
White        D0
Brown        BEEP
Green        LED
Yellow       Alarm

Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires