Aac Block Adhesive - Color: Gray

5

100 Kilograms/Kilograms

50 Bag/Bags

100

12 Months

12 Months

Industrial

CLASSC1T

Premium

Gray

Grey

Cash in Advance (CID)

Cash in Advance (CID)

7 - 10 Days

7 Days

7 Days

850.0 INR (Approx.)

365.0 INR (Approx.)

Method of Application1 Surface PreparationThe surface should be sound, clean, and free from dirt, oil or grease before Arrotile Adhesive is applied | Substrate should be in Saturated Surface Dry (SSD) conditionbefore application of adhesive | Substrates should be in plumb before application of adhesive2 MixingMix 20 kg of Arrotile Adhesive with 5 to 6 liters of water | Mix to a uniformlump-free consistency using a forced action mixer | Keep it for approximately 5 minutes to fatten it | Hand mixing is recommended for small quantities only | Mix as much quantity as can be consumed in 25 min.3 ApplicationApply Arrotile Adhesive paste on substrate with plain side of notch trowel.Press paste firmly to work into substrate.Comb with notch trowel with notched side, notch trowel to be selected as per required bed thickness | Spread as much adhesive paste as can be tiled within 15 minutes | Startplacing/fixing of tiles & tap using beating block or rubber mallet | For large format tiles & stone provide back butter for 100% coverage & firm bonding | Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive, if not proper and if becomes non-sticky then scrap it & apply paste again...4 GROUTINGGrouting should preferably be carried out at least 24 hours after the completion of tiling. For grout joints upto 3mm wide use Arrotile Tile Grout & Epoxy Grout | For grout joints above 3mm wide use RTM Wide | After grouting clean and polish tiles with a damp sponge or cloth5 CLEANINGClean the tools & equipments with potable water immediately after use.Precautions & LimitationsAlways add powder to liquid and not liquid to powder While working in temperature more than 35 C (95 F) always dampen the substrate & finish faster Tiling should not be done when surface temperature is below 40 C.Health & Safety PrecautionsProtective clothing, such as gloves and goggles, should be worn. Treat any contact to the skin eyes with fresh water immediately. Do not induce vomiting & seek medical Assistance immediately Reseal pack after use and ensure product is stored as instructed..Shelf Life & StorageShelf life is 12 months from the date of manufacturing in unopened conditions.Store in a cool & dry place.

AAC Blocks, Fly Ash Bricks, Concrete Blocks