Auto Bumper Heat Staking Welding Machine

We are offering our customers a wide range of Auto Bumper Heat Staking Welding Machine, which are available following Specifications :-
Voltage: 380V or 416V +/-10% 50Hz 3phase
Heating power: 150W per heat staking head
Welding temperature 150 to 180 degree centigrade
Pull resistance >150N per single point.
Weight: About 2.8T per set.
Equipment size: (L)2400mm*(W)1200mm*(H)2800mm
Max environment humidity: 5-80%
Environment temperature: 5-50 degree centigrade
Design conception:
1, Use special designed machine to weld this plastic part.
2, All the electrical connection by Heavy duty fast connectors
3, The pneumatic system connected by pneumatic fast connector.
4, There are air cool blower at every welding position.
5, The equipment driven by pneumatic.
6, The heating mould has two locks after moving back to the original position.
7, The fixture mould is made by Aluminum alloy.
8, There is workpiece test sensor on the mould, if not workpiece on the machine, the welding cycle can't start.
9, Equipment has optical grating to protect the operator, and any door open, the machine will stop working.
10, Equipment adopt the PLC control system, man-machine interface text is English.
11, One welding cycle by one stroke.
Production Ability:
1, The cycle time is 30-50 seconds / PCS (not including the loading and unloading)
2, The machine running time could be 11 hours per shift by 2 shifts every day.