Elastomeric Membrane In Vapi

MOQ1 Liter/Liters

Product TypeWaterproofing Chemical

Size20 kg

Usagewaterproofing

Product TypeElastomeric Membrane

Size470mm-1.5x2.0mtr

Cake Thickness25mm-50mm

Filtration Area0.28-4.78

Chamber Volume2.4-101.8 Liters

MaterialElastomer

MaterialElastomer

Diameter12 Inches

Thickness0.25 Inches

Hardness70 Shore A

Tensile Strength500 Psi

Elongation300%

MOQ10 Unit/Units

UsageIndustrial

ApplicationIndustrial Construction

Product TypeHighly Elastomeric Polyurethane Based Waterproofing Membrane

GradeWaterproofing

AppearanceLiquid

MOQ20 Container/Containers

ApplicationASCOFLEX SUPER is pre-mixed and ready to use. ASCOFLEX SUPER may be applied by brush or paint roller. Prior to applying to general surface area pre-treat all cracks joints corners and coves first by applying a generous coat of ASCOFLEX SUPER approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOFLEX SUPER to same area again allowing to dry. Once pre-treated areas are dry apply a generous coat of ASCOFLEX SUPER to entire surface included pre-treated cracks joints and coves and allow to dry. DO NOT skimp on initial coat of ASCOFLEX SUPER. Allow to dry to the touch before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and if required reapply on required areas and allow it to dry.

Product TypeWater Proofing & Tile Fixing

UsageFor long-lasting waterproofing.

Feature1) Excellent adhesion 2) Easy to use 3) Highly flexible 4) Anti-root properties 5) Crack bridging 6) Can be applied to the interior and exterior surface

MOQ10 Piece/Pieces

TypeWaterproof Membrane

MOQ200 Kilograms/Kilograms

ApplicationWaterproofing

AdvantageDurable Protection

MaterialPVC

UsageFor Wall

Purity99%

Place of OriginIndia

MOQ30 Kilograms/Kilograms

ColorBlack

StorageRoom Temperature

UsageWaterproofing Footing Casting

MOQ25 Kilograms/Kilograms

TypeAcrylic

Physical FormLiquid

GradeIndustrial

ColorWhite

SmellNo Smell

Ph LevelAlkaline

MOQ1 Unit/Units

HS Code39209999

Melting Point>250AdegC

Boiling pointNot applicable / Does not boil

Structural Formula-[CF2-CF2]n-[CF2-CF(OCF2CF(CF3)O)CF2SO3H]m-

ShapeOther Sheet / flat film

Other NamesPFSA membrane Proton exchange membrane Nafion

BasePolyurethane

ExtendTar

Film Thickness1mm

ApplicationBrush/Spray

VOC170g/L

AdhesionExcellent

ApplicationVarious types of construction projects

Product TypeSingle Component Elastomeric In-Situ Liquid Membrane

Main MaterialElastomer

Usagefor waterproofing

FeatureUV resistant Water based