Elastomeric Membrane In Mumbai

MOQ1 Liter/Liters

Product TypeWaterproofing Chemical

Size20 kg

Usagewaterproofing

Product TypeElastomeric Membrane

Size470mm-1.5x2.0mtr

Cake Thickness25mm-50mm

Filtration Area0.28-4.78

Chamber Volume2.4-101.8 Liters

MaterialElastomer

MaterialElastomer

Diameter12 Inches

Thickness0.25 Inches

Hardness70 Shore A

Tensile Strength500 Psi

Elongation300%

MOQ10 Unit/Units

UsageIndustrial

AppearanceLiquid

ApplicationIndustrial Construction

Product TypeHighly Elastomeric Polyurethane Based Waterproofing Membrane

GradeWaterproofing

MOQ20 Container/Containers

ApplicationASCOFLEX SUPER is pre-mixed and ready to use. ASCOFLEX SUPER may be applied by brush or paint roller. Prior to applying to general surface area pre-treat all cracks joints corners and coves first by applying a generous coat of ASCOFLEX SUPER approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOFLEX SUPER to same area again allowing to dry. Once pre-treated areas are dry apply a generous coat of ASCOFLEX SUPER to entire surface included pre-treated cracks joints and coves and allow to dry. DO NOT skimp on initial coat of ASCOFLEX SUPER. Allow to dry to the touch before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and if required reapply on required areas and allow it to dry.

Product TypeWater Proofing & Tile Fixing

UsageFor long-lasting waterproofing.

Feature1) Excellent adhesion 2) Easy to use 3) Highly flexible 4) Anti-root properties 5) Crack bridging 6) Can be applied to the interior and exterior surface

ApplicationVarious types of construction projects

Product TypeSingle Component Elastomeric In-Situ Liquid Membrane

Main MaterialElastomer

Usagefor waterproofing

FeatureUV resistant Water based

ApplicationRoad construction

Product TypeThree Component Polymerized Elastomeric Concrete

Main MaterialPolymerized Elastomeric

UsageRoad construction

FeatureExcellent adhesion

ApplicationIndustrial Flooring

Product TypePolyurethane Liquid Membrane

Main MaterialPolyurethane

UsageFlooring

FeatureTwo component and elastic

MOQ20 Container/Containers

ApplicationConcrete

ColorWhite

Tensile Strength2.5 N/mmA2 (ASTM D 412 - 02) Newtons per Millimetre Squared (N/mm2)

Product TypeElastomeric Acrylic Coating

Purity100%

FeatureHighly reliable

MOQ20 Container/Containers

ApplicationASCOSHIELD PU is pre-mixed and ready to use. ASCOSHIELD PU may be applied by brush or paint roller. Prior to applying to general surface area pre-treat all cracks joints corners and coves first by applying a generous coat of ASCOSHIELD PU approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU to same area again allowing to dry. Once pre-treated areas are dry apply a generous coat of ASCOSHIELD PU to entire surface included pre-treated cracks joints and coves and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU. Allow to dry to the touch before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and if required reapply on required areas and allow it to dry.

Product TypeWaterProofing & Tile Fixing

Surface TreatmentBlocks Brick Concrete Renders etc.

Feature1) Excellent adhesion & highly elastic 2) UV resistant 3) Anti-root properties 4) Excellent crack-bridging 5) Excellent waterproofing 6) Easy & economical application

MOQ20 Container/Containers

ApplicationASCOSHIELD PU+ is pre-mixed and ready to use. ASCOSHIELD PU+ may be applied by brush or paint roller. Prior to applying to general surface area pre-treat all cracks joints corners and coves first by applying a generous coat of ASCOSHIELD PU+ approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU+ to same area again allowing to dry. Once pre-treated areas are dry apply a generous coat of ASCOSHIELD PU+ to entire surface included pre-treated cracks joints and coves and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU+. Allow to dry to the touch before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and if required reapply on required areas and allow it to dry.

Product TypePU Modified Liquid Applied Membrane

Surface TreatmentBlocks Brick Concrete Renders etc.

Feature1) Excellent adhesion & highly elastic 2) UV resistant 3) Anti-root properties 4) Excellent crack-bridging 5) Excellent waterproofing 6) Easy & economical application

MOQ10 Piece/Pieces

TypeWaterproof Membrane