Elastomeric Membrane In Greater-noida

ColorWhite

Volume4 Litres

TypeElastomeric

BaseAcrylic

ApplicationBrush/Roller

FeaturesWaterproofs Crack bridging High build Flexible Durable Protects Easy application Long lasting

MOQ100 Piece/Pieces

Chemical FormLiquid

PurityHigh

Usage & ApplicationsIndustrial

ThicknessDifferent available Millimeter (mm)

ColorWhite

MOQ50 Piece/Pieces

Water ResistanceYes

Size18cm*12cm 7x4inch (LxW)

Display ColorColor

Screen Size17cm*100mtr Meter (m)

Body MaterialTPU

AccessoriesScreen Protector and lamination film

MOQ200 Kilograms/Kilograms

Purity100%

ColorGrey

Product TypePu Elastomeric Membrane

UsageInterior & Exterior Coatings

MOQ100 Kilograms/Kilograms

Packaging Size200 kg 50kg 20kg 10kg 5kg & 1kg

Chemical FormLiquid

Usage & ApplicationsWaterproofing

TypeWaterproof Membrane

ColorTransparent

MOQ10 Kilograms/Kilograms

Usage & ApplicationsIndustrial & Commercial

PurityHigh

ColorWhite

Coverage10-12 sq m/liter

Drying time2-4 hours

VOC content<50 g/L

Application MethodBrush roller spray

PackagingVarious sizes

MOQ50 Kilograms/Kilograms

FeaturesWaterproof

Usage & Applicationsindustrial

Surface TreatmentColour coated

TypeLiquid Membrane

Size4 L

TypeWaterproof Membrane

MaterialPolymer

MOQ20 Container/Containers

ApplicationASCOFLEX SUPER is pre-mixed and ready to use. ASCOFLEX SUPER may be applied by brush or paint roller. Prior to applying to general surface area pre-treat all cracks joints corners and coves first by applying a generous coat of ASCOFLEX SUPER approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOFLEX SUPER to same area again allowing to dry. Once pre-treated areas are dry apply a generous coat of ASCOFLEX SUPER to entire surface included pre-treated cracks joints and coves and allow to dry. DO NOT skimp on initial coat of ASCOFLEX SUPER. Allow to dry to the touch before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and if required reapply on required areas and allow it to dry.

Product TypeWater Proofing & Tile Fixing

UsageFor long-lasting waterproofing.

Feature1) Excellent adhesion 2) Easy to use 3) Highly flexible 4) Anti-root properties 5) Crack bridging 6) Can be applied to the interior and exterior surface

MOQ10 Piece/Pieces

TypeWaterproof Membrane

MaterialElastomer

Diameter12 Inches

Thickness0.25 Inches

Hardness70 Shore A

Tensile Strength500 Psi

Elongation300%