Tile Fixing Adhesive In Surendranagar

ColorRed

Coverage area1 sq m

FeaturesStrong grip Fast setting Water resistant Versatile use High strength Easy application

MaterialCement based

PackagingPouches

Setting time30 minutes

AdmixtureChemical

ApplicationFlooring & wall

ColorGray

FeaturesHigh strength Weatherproof Great adhesion Slip resistance High durability Easy application

FormPowder

MaterialCement based

ApplicationTiles marbles

ColorGrey

FeaturesStrong adhesion Weatherproof Easy application Cost-effective Durable Versatile High performance

MaterialCement polymers

PackagingKraft paper bag

Weight25 kg

MOQ5 Pack/Packs

Adhesive Typesolvent adhesive

ColorWhite

UsageConstruction

ApplicationSpecially designed for interior & exterior floor and wall installation of all types of glass mosaic. Swimming pools various water body. It can be used to clad glass tiles and natural stones/ artificial stones.

Physical StatePowder

MOQ100 Bag/Bags

FormPowder

ColorWhite

UsageFootwear Leather

Physical StatePowder

AdherenceHigh

ColorGray

FeaturesStrong grip Non-shrink Flexible Water resistant Long adjustability High performance Easy application Versatile use

FlexibilityHigh

FormPowder

MaterialPolymer based

MOQ4 bags Bag/Bags

ColorWhite

TypeGlass Mosaic Tile Adhesive

Physical FormPowder

Application1. Power should be applied with a suitable toothed spreader to be chosen according to the size andcharacteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spreada fine initial layer pressing down hard so as to obtain maximum adhesion to the substrate and toregulate water absorption after which the thickness can be adjusted as required by tilting thespreader at an angle.2. Spread the adhesive over a surface area which will allow for laying of the covering materials within the indicated open time and check for suitability of the adhesive at regular intervals. The open time may vary considerably even during the application depending on various factors such as exposure to sunlight air currents absorbency of the substrate temperature and relative humidity of the atmosphere.3. Press down each tile to allow for complete uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic in outdoor locations on underfloor heating systems or with materials4. In general ceramic tiles do not require preliminary treatment however these materials should be checked to ensure they are free from traces of residual dust or materials not properly anchored to the surface.

Chemical NameConstruction Chemical

ApplicationInterior/Exterior

ColorWhite

Coverage6-6.5 sqm

FeaturesStrong adhesion Long lasting Easy to use Fast setting Cost effective Versatile use High quality Excellent finish

MaterialCement based

Packaging22kg bag

ApplicationVarious surfaces

ColorYellow

FeaturesStrong bonding Versatile use Durable Cost-effective Easy application Fast setting

MaterialPolymer based

PackagingCarton

Shelf life24 months

Adhesion strength1.6-2.2 N/mm²

ApplicationWalls floors

FeaturesStrong bonding Water resistant Easy application Durable Versatile

MaterialPolymer

PackagingBag

StandardsBS-5980-1980

MOQ100 Pack/Packs

CAS NoTiles Adhesive

Other NamesTiles Adhesive

UsageAdvertising

GradeA

Purity100%

ApplicationConstruction

Adhesion strengthHigh

ApplicationInterior/exterior

CoverageVariable

FeaturesStrong bonding Tile fixing High strength Durable Reliable Versatile Easy application

MaterialPolymer modified

Packaging25kg bag

MOQ500 Kilograms/Kilograms

UsageConstruction

GradeChemical

Purity99

ApplicationTiles

ColorGrey

Physical StatePowder

MOQ10 Bag/Bags

UsageConstruction

Grade53 Grade

ApplicationTile Bonding

Physical StatePowder

Application methodTrowel

ColorBlue

Coverage10 sq m

FeaturesStrong bonding Water resistant Easy application Durable Cost effective Long lasting

MaterialCement based

Mixing ratioWater based