Tile Fixing Adhesive In Himatnagar

AdherenceHigh

ColorGray

FeaturesStrong grip Non-shrink Flexible Water resistant Long adjustability High performance Easy application Versatile use

FlexibilityHigh

FormPowder

MaterialPolymer based

MOQ4 bags Bag/Bags

ColorWhite

TypeGlass Mosaic Tile Adhesive

Physical FormPowder

Application1. Power should be applied with a suitable toothed spreader to be chosen according to the size andcharacteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spreada fine initial layer pressing down hard so as to obtain maximum adhesion to the substrate and toregulate water absorption after which the thickness can be adjusted as required by tilting thespreader at an angle.2. Spread the adhesive over a surface area which will allow for laying of the covering materials within the indicated open time and check for suitability of the adhesive at regular intervals. The open time may vary considerably even during the application depending on various factors such as exposure to sunlight air currents absorbency of the substrate temperature and relative humidity of the atmosphere.3. Press down each tile to allow for complete uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic in outdoor locations on underfloor heating systems or with materials4. In general ceramic tiles do not require preliminary treatment however these materials should be checked to ensure they are free from traces of residual dust or materials not properly anchored to the surface.

Chemical NameConstruction Chemical

ApplicationInterior/Exterior

ColorWhite

Coverage6-6.5 sqm

FeaturesStrong adhesion Long lasting Easy to use Fast setting Cost effective Versatile use High quality Excellent finish

MaterialCement based

Packaging22kg bag

ApplicationVarious surfaces

ColorYellow

FeaturesStrong bonding Versatile use Durable Cost-effective Easy application Fast setting

MaterialPolymer based

PackagingCarton

Shelf life24 months

Adhesion strength1.6-2.2 N/mm²

ApplicationWalls floors

FeaturesStrong bonding Water resistant Easy application Durable Versatile

MaterialPolymer

PackagingBag

StandardsBS-5980-1980

MOQ100 Pack/Packs

CAS NoTiles Adhesive

Other NamesTiles Adhesive

UsageAdvertising

GradeA

Purity100%

ApplicationConstruction

Adhesion strengthHigh

ApplicationInterior/exterior

CoverageVariable

FeaturesStrong bonding Tile fixing High strength Durable Reliable Versatile Easy application

MaterialPolymer modified

Packaging25kg bag

MOQ500 Kilograms/Kilograms

UsageConstruction

GradeChemical

Purity99

ApplicationTiles

ColorGrey

Physical StatePowder

MOQ10 Bag/Bags

UsageConstruction

Grade53 Grade

ApplicationTile Bonding

Physical StatePowder

Application methodTrowel

ColorBlue

Coverage10 sq m

FeaturesStrong bonding Water resistant Easy application Durable Cost effective Long lasting

MaterialCement based

Mixing ratioWater based

UsageConstruction

Physical StatePowder

ApplicationInterior/Exterior

ColorGrey

CoverageVaries

FeaturesStrong bonding Shock absorbing Easy to apply Easy to clean High-strength Flexible Weather resistant Durable

MaterialCement based

Packaging20 kg bag

MOQ500 Kilograms/Kilograms

GradeA

MOQ20 Bag/Bags

Holding PowerNA

Glue thicknessNA

Storage TemperatureRoom Temperature

Adhesive TypeOther

ColorGrey / White Powder

GradeA

MOQ5 Piece/Pieces

MaterialOther

Tensile Strength1.0 N/mm2 (as per ANSI/EN standards) Newtons per Millimetre Squared (N/mm2)

Glue thickness3-10 mm recommended Millimeter (mm)

Storage Temperature5C to 40C Celsius (oC)

Surface Of ApplicationConcrete cement plaster screed tile masonry

FeaturesWater resistant non-shrink excellent workability extended adjustment time