• Sell
  • Buy
  • Sell
in Bulk
voice search

Machinery & Parts

(12400 products)

Related Categories

Top Machinery & PartsCategories

Product Showcase

Industrial Billet Caster Machine

Industrial Billet Caster Machine

XI'AN SHILLANG TRADING CO. LTD.

Brass Alloy Cast Iron Bearing

Brass Alloy Cast Iron Bearing

150.00 - 15000.00 INR (Approx.)

UMIYA ENTERPRISE

High Efficiency Jcb Filter Kit

High Efficiency Jcb Filter Kit

S P INTERNATIONAL

Silver Steel Rolling Mill Parts

Silver Steel Rolling Mill Parts

SANJAY CASTING & ENGINEERING COMPANY

Metal Welded Assembly Parts

Price: 1 INR (Approx.)

MOQ - 500 Unit/Units

Product Type - Machine Parts

Material - Metal

3 Years

Business Type: Manufacturer | Exporter

UMAA ENGINEERS

Chennai

Silver Steel Rolling Mill Parts

MOQ - 2 Ton/Tons

Product Type - Machine Spare Part

Material - Steel

Surface Treatment - Coated

15 Years

Business Type: Manufacturer | Supplier

SANJAY CASTING & ENGINEERING COMPANY

Howrah

Bulker Unloading System Blower

Price: 200000 INR (Approx.)

MOQ - 1 Unit/Units

17 Years

Business Type: Manufacturer | Supplier

AIR VAC EQUIPMENT

Ahmedabad

Copper Kiln Tyre

MOQ - 1 Plant/Plants

Product Type - Machine Accessories

Material - Steel

Color - Copper

21 Years

Business Type: Manufacturer | Supplier

ASHOKA MACHINE TOOLS CORPORATION

Greater Noida
Jaipur

HDPE/PP Lined MS Agitators

13 Years

Business Type: Manufacturer | Supplier

INDUSTRIAL POLY TANKS AND VESSELS

Palghar

Twin Screw Barrel

Price: 2000000.00 - 10000000.00 INR (Approx.)

MOQ - 1 Unit/Units

8 Years

Business Type: Manufacturer | Exporter

PRECIHOLE MACHINE TOOLS PVT. LTD.

Bhiwandi

Jcb hydraulic stainer filter

Price: 200 INR (Approx.)

MOQ - 10 Piece/Pieces

Gear Tooth Profile - Other

13 Years

Business Type: Manufacturer | Exporter

GOYAL AUTOMOTIVES

New Delhi

Roll Maker Machine

Price: 52500 INR (Approx.)

MOQ - 1 Set/Sets

20 Years

Business Type: Manufacturer | Supplier

GAYATRI ENGINEERING WORKS

Anand

Vibratory Bowl Feeder

3 Years

Business Type: Manufacturer

MAGNA TRONIX

Chennai

Cnc Precision Parts

Price: 1000 INR (Approx.)

MOQ - 10000 Piece/Pieces

4 Years

Business Type: Manufacturer | Supplier

LABH PROJECTS PVT. LTD.

Ahmedabad

Tail Breaker

21 Years

Business Type: Manufacturer | Supplier

UGI ENGINEERING WORKS PVT. LIMITED

Kolkata

Corrosion Resistant Way Wiper

9 Years

Response Rate: 86.49%

Business Type: Manufacturer | Exporter

GURUKRUPA BELLOWS PVT LTD

Pune

High Grade Parallel Gripper MCHB

MOQ - 1 Piece/Pieces

5 Years

Business Type: Manufacturer | Supplier

NANO TECHNOLOGIES

Chennai

Silver Pharmaceutical Machine Ss Parts

Price: 30000 INR (Approx.)

MOQ - 1 Set/Sets

Color - Silver

Product Type - Machine Spare Part

Material - SS

5 Years

Response Rate: 70.00%

Business Type: Manufacturer | Exporter

SATV INDUSTRIES

Ahmedabad

White 240 V Plan Sifter Bag

Price: 102 INR (Approx.)

MOQ - 50 Piece/Pieces

Product Type - Machine Parts

Material - Rubber

Voltage - 240 Volt (v)

2 Years

Business Type: Manufacturer | Trading Company

Partik Trading Company

Howrah

Black Drag Chain

Price: 900-25000 INR (Approx.)

MOQ - 1 Meter/Meters

Product Type - Machine Parts

Material - plastics drag chian

Technology - CNC

5 Years

Business Type: Manufacturer | Exporter

BACKLER INDIA PRIVATE LIMITED

Bhosari

Packaging Machine Cutter

Price: 500 INR (Approx.)

MOQ - 1 Piece/Pieces

4 Years

Business Type: Manufacturer | Supplier

PAL INNOVATIONS (P) LTD.

Bhiwadi

Grips & Accessories for UNITEK Models

4 Years

Business Type: Manufacturer | Exporter

CANAN TESTING SERVICES

Delhi

Cooling Tower Spares

16 Years

Business Type: Manufacturer | Exporter

ASCENT MACHINERIES & ENGG. SERVICES

Mumbai
Kolkata

Quality Checked Anti Vibration Pad

12 Years

Business Type: Manufacturer | Distributor

KPT INDUSTRIES LIMITED

Pune

D Shackle

7 Years

Business Type: Manufacturer | Distributor

ABDULHUSAIN JIWAJI

Rajkot

Alumina Ceramic Grinding Media

15 Years

Business Type: Manufacturer | Supplier

BMW STEELS LTD.

Haridwar

Silver Histen Mechanical Joint Hi Dr

Price: 5 USD ($) (Approx.)

MOQ - 100 Piece/Pieces

Material - MS

Pressure - 20 Bar

5 Years

Business Type: Exporter

YESONBIZ

Seoul

Way Wiper

Price: 1000.00 - 10000.00 INR (Approx.)

MOQ - 1 Unit/Units

7 Years

Business Type: Manufacturer

SCUTES INDIA PVT. LTD.

Pune

Machinery & Parts Manufacturers | Suppliers in India

Company NameLocationMember Since
Ashoka Machine Tools CorporationGreater Noida, India21 Years
Ugi Engineering Works Pvt. LimitedKolkata, India21 Years
Gayatri Engineering WorksAnand, India20 Years
Air Vac EquipmentAhmedabad, India17 Years
Ascent Machineries & Engg. ServicesMumbai, India16 Years
Sanjay Casting & Engineering CompanyHowrah, India15 Years
Bmw Steels Ltd.Haridwar, India15 Years
Moderate Machines (Pvt.) Ltd.Jaipur, India13 Years
Industrial Poly Tanks And VesselsPalghar, India13 Years
Goyal AutomotivesNew Delhi, India13 Years

Machinery & Parts: Types And Applications

Introduction to Machinery & Parts
 

To apply forces and regulate motion, a machine requires a power source. Machines can refer to either man-made devices like those powered by engines or motors, or natural biological macromolecules like molecular machines.

A machine part is the smallest individual mechanical part or assembly of a machine in mechanical engineering. They serve a specific purpose and can't be substituted for anything else. Although a bearing can be disassembled into its component mechanical parts—balls, rings, and seals—these elements cannot carry out the bearing's job.

Many different kinds of machines rely on these components. Fasteners (screws, nuts, rivets, etc.), chains, shafts, keys, bearings, and belts are all instances of multipurpose machine elements. In most of these devices, they serve the same purpose.

What are the Various Parts of a Machine
 

1. Bearings

Bearings are a ubiquitous component of mechanical systems. Their duty is to reduce or eliminate sticking or rubbing between moving components. Without it, the mechanical design of rotating machines would be without a crucial component.

You can find them in a wide range of sizes and forms. The wide variety of bearing types on the market allows engineers to find the best one for each application, maximizing reliability, efficiency, performance, and durability.

Depending on the kind of bearing, they can transfer radial loads from the spinning part to the bearing housing or axial loads (thrust bearings).

2. Motor

It's the thing that does the work by changing the shape of the energy that powers it or burns it. The motors themselves are energy converters, converting kinetic, chemical, or electrical energy into mechanical power. This is doable with a rotating axis or a piston that moves in and out of the same hole at different speeds. Transformers are motors that can change mechanical energy into motion. This class also contains compressors and pumps.

3. Shafts

Typically, shafts are CNC machined after being developed for a specific purpose. Shafts are long, cylinder-shaped parts that are used to transmit mechanical power and torque between two other parts. 

Engineers utilize them when a direct connection would be impractical due to physical separation or when two or more parts of the drive train must function in different conditions. 

From the engine room to the pump room, the bulkhead is only penetrated by the shaft. When in use, the steam turbines in the engine room generate a great deal of heat.

4. Keys
Keys are tiny mechanical pieces used in machine design to couple shafts to other moving parts. Torque between the two parts may be transferred only via them in some instances. The keyway is the term for the slotted opening in the hub. When the key is inserted into the shaft, it rests on the keyseat at the bottom of the keyway. 

A keyed joint is the entire assembled unit. When keys are put in the axial direction, a keyed joint prevents any relative rotational motion but may permit some axial motion.

5. Frame

The engine and the system are held in place by a sturdy frame. To ensure the connection or coupling of all machine parts is its job. The safety of the product depends on numerous factors that must be considered during the frame's design phase. The best possible structure can then be designed based on the analysis of effort and deformation performed on each machine part.

6. Couplings

Couplings, in the context of mechanical design, are components that join two rotating in-line shafts for the purpose of transmitting power. Each component in the assembly spins at the same rate. Depending on the situation, a connection might be either rigid or flexible.

Flexible coupling can compensate for little misalignments in the shafts that may occur during installation or over time. In addition to protecting machinery from damage, they extend its useful life by dampening vibration and shock.
 
7. Regulation and Control System

These are the parts of the machine that allow the operator to adjust the power output in order to match the workload. Indicators, buttons, switches, actuators, and controls all fall under this category.

8. Fasteners

When designing machines, it's crucial to have as much detail as possible when it comes to the design or selection of fasteners. This is done to guarantee that the machine parts in question are up to the task of withstanding the loads imposed by the product while in use. Standard fastener materials include carbon steel, stainless steel, and alloy steel.

9. Gears

Wheels with teeth are used in gears, which are one of the simplest types of machine parts. Gears transmit rotational energy from one shaft to another. In accordance with the principles of energy conservation, they are able to either raise or reduce angular velocity while doing the opposite to the torque. These components serve essentially as levers in a mechanical system that facilitates translation.

Different Types of Machinery & Parts and Their Applications
 

1. Drill Press

A drill press is a type of machine tool typically employed in the metalworking industry for the purpose of drilling. A work surface, known as the bed, is typically included to enable the component being drilled to be held in a vertical position, and it can be operated manually or electrically.

They are more stable than traditional hand drills and may be used with confidence. Making drills at the workbench is a continuous process that guarantees pinpoint accuracy. Drill presses have been used in the metalworking industry for hundreds of years.

2. Hobbing Machines

When it comes to the metalworking industry, hobbing machines have been instrumental in boosting both quality and productivity. They are a sort of milling machine that uses a unique cutting tool to manufacture precise cylindrical components such as shafts, gears, splines, and many more. At the very least, any metal factory worth its salt will have a couple of hobber machines. They can produce vast volumes of parts per day for a low cost and with a small staff.

3. Shearing Machine

Shearing machines are used to cut sheet metal to certain dimensions. The lack of chips and other residue from the shearing process makes this metalworking equipment particularly well-suited to use in factories, where such waste would otherwise litter the workplace. Shearing machines, like the other tools on this list, are indispensable in the majority of metal fabrication factories. Shearing is related to blanking and piercing, two additional major metal-cutting procedures.

4. Planer Machine

Parallels can be drawn between shaper machines and planar machines. In truth, this device is identical to others like it, with the exception that the cutting tool remains in one place while the workpiece is moved in a straight path. Additionally, these tools are often bigger than shaper machines. Metals like steel can have their thickness and dimensions modified by using these tools during the machining process. In addition, it can be used to smooth out uneven surfaces.

5. Broaching Machines

Materials of all kinds can be cut, shaped, and formed by a broaching machine. A broach or toothed tool is used to cut away excess material. Broaching can be done either in a linear or circular fashion. Linear broaching, in which the machine is parallel to the workpiece, is the more prevalent method. But in rotary broaching, the broach is spun while being used on the workpiece. Broaches are multipurpose instruments that can be put to work in a wide range of settings. They make a wide variety of items for use in metalworking, which are sold to professionals in the field.

6. Shaper Machine

In order to shape a workpiece, a shaper machine employs a single-point cutting tool that travels in a linear motion. The operation is straightforward and the device is intuitive to use. Metal can be cut, shaped, or formed with these mills. Because of the way they are usually set up, they may easily reach the material from any angle.

7. Drilling Machine

One of the most ubiquitous machine types in a metalworking workplace is the drilling machine. They are also handy for a wide range of home maintenance tasks. Drilling machines are user-friendly because their tools are simple to install and swap out.

8. Grinding Machine

A grinding machine utilizes the rotation of an abrasive wheel to achieve the desired finish. The workpiece is finished by the rotating wheel, which removes a very fine layer of material along the surface, leaving it feeling smooth to the touch. After other instruments like saws or lathes have been used, a grinder can be used to refine the shape, flatten, and smooth the surface of the cut parts. In order to refinish or refurbish an item, abrasive materials can be used to get rid of any rust or old paint.

9. Milling Machine

Using rotary cutters, the milling machine is a metalworking tool. A vertically moveable work table secures the workpiece while a rotating tool can be moved around it. In general, a milling machine can conduct two distinct types of milling: face milling and peripheral milling. Unlike peripheral milling, in which the cutter is set perpendicular to the workpiece, face milling involves cutting a flat surface at right angles to the rotation of the cutter.

Conclusion

Although each part of the machine functions autonomously, they all contribute to the machine's overall ability to affect motion. This summary of machine automation parts is meant to be informative and comprehensive. Experts can answer any queries you may have about machine parts and automation design, as they are a leading industrial parts supplier and bespoke automation specialist.
 

FAQs: Machinery & Parts
 

Q.How do you identify machine parts?
Ans. To check the quality of machine parts, don’t forget to check the warranty. Meet manufacturers and collect the ideal detail about the machine you’re purchasing for the specific task.

Q.What materials are used to manufacture machinery & parts?
Ans. The material includes Aluminium, Zinc, Stainless Steel, Copper, Magnesium, Titanium, Bronze, Brass, and Iron.

Q. What are some examples of general and special-purpose machinery & parts?
Ans. Developed to meet the specific needs of a given industry, Special Purpose Machines are highly sophisticated pieces of machinery that are fully automated and programmed. These mechanical components have a designated place in the creation of machines.

Q.How much does it cost to replace machinery & parts?
Ans. Producing machinery rarely fetches what it would cost to replace it at the market value of 500–10,000 INR.
 


Related Categories

Related Categories

 

FILTERS

Ti Shopping

Products ready for immediate purchase.

Active Supplier

Ti Trusted

With Price

Business Type

 

Related Categories