Concrete Densifier In Pune

MOQ60 Kilograms/Kilograms

UsageImproves workability for better finish of concrete surface; Increases the hydration of cement resulting in higher strength and lower porosity.

AppearanceMilky White

ApplicationImproves workability for better finish of concrete surface; Increases the hydration of cement resulting in higher strength and lower porosity.

ColorWhite

TypeColloidal Silica Based

Physical FormLiquid

MOQ20 Kilograms/Kilograms

ColorOther

Ph LevelAlkaline

Chemical NameNanosilica

Physical FormLiquid

HS Code28112200

FeatureHigh strength

MOQ20 Kilograms/Kilograms

ColorOther

Chemical NameNanosilica

FeatureHigh strength

Water Content50%

SmellNo Smell

Ph LevelAlkaline

MOQ10 Kilograms/Kilograms

Chemical NameConcrete Densifier

UsageIncreased surface hardness imparted by LD drastically improves abrasion resistance reduces liquid penetration and dusting and simplifies maintenance.

ApplicationPenetrates deep in the concrete to produce insoluble calcium silicate hydrate within the concrete pores.

TypeConcentrated & premium nano-lithium based densifier / hardener

Ph LevelAlkaline

Physical FormLiquid

MOQ60 Kilograms/Kilograms

SmellNo Smell

UsageConcrete Surface Treatment - Densification and Waterproofing; Concrete Admixture - Coatings part of binder system; Welding Rod Binder Additive; Refractory Applications; Flame Retardant; Ceramics Glazes

Chemical NameLithium Silicate

TypeLithium Silicate

Physical FormLiquid

ColorColorless

MOQ25 Kilograms/Kilograms

TypeModified Sulphonated Naphthalene Formaldehyde Condensate (SNF)

Usageused as superplasticiser for production of free flowing concrete for slabs foundations walls beams columns and piers; areas with dense reinforcement etc. As water reducing agent it is used for early and ultimate high strength concrete such as pre-cast concrete pre-stressed concrete bridges cantilever structure and foundations etc.

Applicationincreases the workability (plasticity) of the concrete mix for constant water to cement ratio. The same level of workability is achieved at reduced water cement ratio. It reduces the water bleeding.

Water ContentSpecific gravity : 1.20 +/- 0.02 at 25 Degree Centigrade

Physical FormLiquid

GradeIndustrial

MOQ20 Kilograms/Kilograms

GradeIndustrial

TypePotassium Silicate

ColorColorless

Other NamesPotassium Silicate

AppearanceTransparent

Ph LevelAlkaline

MOQ60 Kilograms/Kilograms

Physical FormLiquid

GradeIndustrial

Ph LevelAlkaline

Chemical NameSet Accelerator

AppearanceHazy whitish liquid

TypeCa+ based salt solution

MOQ20 Kilograms/Kilograms

ColorColorless

Physical FormLiquid

ApplicationCures the concrete and hardens it

TypeCuring & Densifier

Ph LevelAlkaline

GradeIndustrial

MOQ50 Kilograms/Kilograms

GradeAlkalike

ApplicationCETEX-SA increases the chemical reaction of cement and water thereby accelerating the rate of setting and early gain in the strength. Due to increased workability one can optimize the water dosage to achieve higher overall strength of concrete.

ColorBrown

Physical FormLiquid

UsageUsed in production of unreinforced concrete where early set is required. It can also be used in reinforced concrete where total chloride is below 1.0% of cementatious matter. It is also suitable for concrete where high early strength is required or formwork has to be removed early.

TypeCalcium chloride based liquid

MOQ20 Kilograms/Kilograms

UsageUses of CETEX AB are bonding of old concrete to new concrete / mortar patching resurfacing spray and fill coats precast repairing building panels & beams industrial flooring highway and bridge deck repairs waterproofing etc.

GradeIndustrial

Chemical NameBonding Agent

AppearanceMilky White

ColorWhite

Physical FormLiquid

MOQ60 Kilograms/Kilograms

AppearanceViscous Liquid

Ph LevelAlkaline

GradeIndustrial

Physical FormLiquid

SmellNo Smell

ApplicationWhen FCD is applied it penetrates and settles in the pores or reacts with the hydroxide and oxides to produce bigger molecules which reduce the porosity of the surface. This traps the moisture of wet concrete which aids in curing of wet concrete and makes the top layer more compact and dense thereby increases hardness and abrasion resistance of the applied surface. Mild usage of concrete can be started within 24 hours of application. This is beneficial for floors where movement is restricted during curing because of water or coating.

MOQ60 Kilograms/Kilograms

Physical FormLiquid

HS Code28399090

ApplicationDLPD hardens a wide variety of cementatious surfaces. It penetrates and reacts with the free calcium hydroxide to produce a by-product which fills up the pores on the surface. This aids in trapping the moisture of wet concrete which aids in curing of wet concrete.

Ph LevelAlkaline

UsageDLPD hardens a wide variety of cementatious surfaces. It penetrates and reacts with the free calcium hydroxide to produce a by-product which fills up the pores on the surface. This aids in trapping the moisture of wet concrete which aids in curing of wet concrete.

TypePotassium Silicate Based

MOQ20 Kilograms/Kilograms

TypeConcentrated & premium nano-lithium based

Ph LevelAlkaline

GradeIndustrial

Physical FormLiquid

ApplicationIt is safer faster and easier to apply. It penetrates deep in the concrete to produce insoluble calcium silicate hydrate within the concrete pores. The increased surface hardness imparted by LD drastically improves abrasion resistance reduces liquid penetration and dusting and simplifies maintenance.

ColorColorless

ApplicationBrush/Roller/Spray

ColorGray

Dilution Ratio1:1

FeaturesHardens concrete Dustproofs floors Improves durability UV resistant Increases shine Easy application Eco-friendly Cost effective

FormLiquid

VOCNil