Wall Tile Adhesive - High Performance For Large Format And Low Porosity Tiles | Water Resistant, Longer Shelf Life, Ideal For Wet And Dry Conditions

Being a remarkable
organization, we bring forth a striking assortment of Wall Tile Adhesive. It is a high performance adhesive for fixing low porosity and large format tiles. We use optimum quality compounds, sourced from trusted vendors to formulate this adhesive. For safe transportation, we pack this adhesive in air tight materials and store in our capacious warehouses. We offer this Wall Tile Adhesive at cost effective prices to clients.

Features:

• Good adhesion
• Resistant to water
• Longer shelf life
  

Wall Tile Adhesive

Use

• High-performance adhesive for fixing low porosity and large format tiles.
• For superimposed fixed on vertical and horizontal
• No height limitation for facades tiles under 1100 cm2 surface area.
• For heavy duty flooring
• Suitable for wet and dry service conditions including bathrooms and kitchens.

Limitation and Recommendations

• Heavy tiles must be supported by mechanical clamps
• Do not apply on gypsum plaster or metal surfaces
• Use notched trowel
• Respect the mixing ratio
• Keep out of reach children
• For heavier/larger tiles use double spreading.

Surface Preparation

• Ensure that the substrate is flat, hard stable, well adhered and has normal absorption
• Clean the substrate to remove dust, dirt residual coating, grease and laitance using suitable process.
• Ensure that the vertical and horizontal right angle is correctly maintained.
• Repair local undulation/damage on substrate at least 48 hours before application of tile adhesive.
• Chasing for the concealed piping, plumbing and electrical conduction etc should be carried out before application of tile adhesive.
• Saturate the surface well and remove excess water before application of the tile adhesive.

Application Properties

• Pot life: 3 hours
• Open time: 30 min
• Adjustment time: 30 min
• Time before grouting: 24 hours
• Time to walk on tiled floor: 24 hours after laying
• Recommended thickness: 3 to 10mm
• Temperature of application: to 5^oC+35^oC
• Mix ratio: 20kg-4 to 7 ltr.