Valves Body By Unity Forge Pvt. Ltd.

Valve: A device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure    Yokes: Yokes are united using universal joints in a vehicle steering column shaft assembly that has two shafts, lower shaft and upper shaft. It forms an important component in steering wheel and column assembly. We offer wide range of best quality forged steering column yokes, body yokes, pinch bolt yokes, for the industry. We are well known manufacturers of forged yokes for steering column, body yokes using very high quality steels so as to ensure required metallurgical properties.  Body: The valve's body is the outer casing of most or all of the valve that contains the internal parts or trim. The bonnet is the part of the encasing through which the stem (see below) passes and that forms a guide and seal for the stem. The bonnet typically screws into or is bolted to the valve body. Bonnet: A bonnet acts as a cover on the valve body. It is commonly semi-permanently screwed into the valve body or bolted onto it. During manufacture of the valve, the internal parts are put into the body and then the bonnet is attached to hold everything together inside. To access internal parts of a valve, a user would take off the bonnet, usually for maintenance.