Usb Charging Port - High-impact Plastic & Metal Alloy, 3.4x2.2x2.4cm, Black With Silver Contacts | Usb-a Female, 2.1a Output, Emi/emc Shielding, Flame-retardant, Rohs Compliant

240 INR (Approx.)

13000.0 INR (Approx.)

Anti-corrosive coating

N/A

Approx. 3.4 cm x 2.2 cm x 2.4 cm

210 297 mm Millimeter (mm)

10% - 85% RH, non-condensing

Suitable for normal industrial environments, typically up to 85% RH

Laptops, power banks, wall sockets, car chargers, adapters

the automotive industry, the pad is used in electric vehicle (EV) battery packs, battery management systems (BMS), onboard chargers, DC-DC converters, inverters, and power control units. In industrial electronics, it is applied in motor drives, power supplies, automation controllers, and renewable energy equipment, including solar and wind power converters. Consumer electronics manufacturers use it in laptops, desktop computers, gaming devices, networking equipment, and telecommunications hardware to dissipate heat from processors, memory modules, and power management circuits.

DC 5V

N/A Ampere (amp)

Standard USB port size

210 297 mm

Surface mount technology

ontrolled assembly and compression method

Charging electronic devices

The tesa 58327 Acrylic Thermal Pad is used to efficiently transfer heat from electronic components to heat sinks, metal housings, or cooling plates while providing reliable electrical insulation. Its acrylic-based formulation is designed to fill air gaps and uneven surfaces between heat-generating devices and cooling elements, reducing thermal resistance and improving overall heat dissipation. This thermal pad is commonly used in power electronics, automotive systems, battery management systems (BMS), electric vehicle battery packs, industrial control equipment, LED lighting modules, telecommunications hardware, power supplies, and consumer electronics. It can be applied between components such as MOSFETs, IGBTs, processors, memory devices, voltage regulators, and aluminum heat sinks to maintain safe operating temperatures and improve long-term reliability.

Compact rectangular housing

Rolls, Sheet

IP20

N/A

Up to 5 years under normal use

Lifetime of the electronic assembly under normal operating conditions

-10C to +50C

40 C to +125 C Celsius (oC)

Integrated circuit assembly

The process of using the tesa 58327 Acrylic Thermal Pad begins with preparing the contact surfaces. Both the electronic component and the heat sink or metal enclosure should be cleaned thoroughly to remove dust, grease, oil, and other contaminants that could reduce thermal performance. Once the surfaces are clean and dry, the thermal pad is cut to the required dimensions so that it completely covers the heat-generating component without interfering with nearby parts. Next, one protective release liner is removed, and the pad is carefully positioned on the component. Gentle pressure is applied to secure the pad and eliminate trapped air. The second release liner is then removed before placing the heat sink, cooling plate, or enclosure onto the pad. During assembly, uniform clamping pressure is applied to compress the pad slightly, allowing it to conform to surface irregularities and fill microscopic air gaps. This creates an efficient thermal interface for transferring heat from the component to the cooling surface.

1000 Per Month

100 Per Week

All India

All India