Tank Lining Resin

1. Epoxy Glass Flakes Filled Resin :
This is a new generation specially formulated product. The advantage of the product is that the glass flakes are already incorporated and suspended in the epoxy resin and the filled resin mixed with hardener can be directly applied over the tanks wall & floors in a single application. Handling is very simple. A single coat gives a very high floor thickness of 500 microns as compared ti thickness achieved with basic epoxy coating which gives only 75 - 100 microns per coat. The glass flakes are so suspended that a uniform layer is achieved in each coat. Application is recommended to be carried out with airless spray machines. The product is to be stored in cold condition. This is highly recommended for lining inside DM water tank and other MS tanks.

2. Vinyl Ester Glass Flakes Filled Resin :
This is same as mentioneed above but instead of epoxy resin, vinyl ester resin is used.The success of usage of the above products would not be proper or successful without a preceding layer of suitable primers or suitable interliners.