Switching Power Supply - 100w To 102w Output, 76%-81% Efficiency | Overload And Over-voltage Protection, Wide Ac Input Range

Following are the specifications of Switching Power Supply:
DC output power : 100W 101W 102W 100.5W
Efficiency : 76% 78% 80% 81%
Adjustable range for DC voltage 10% 10% 10% 10%
AC input voltage range 85-132VAC /176~264VAC selected by switch 47~63Hz, 248~370VDC
Input current 2A/115V 1A/230A
AC IN rush current Cold-start current30A/115V 60A/230V
Leakage current <1mA/240VAC
Overload protection 105%-150% Type : Fold back : current limiting reset:auto recovery
Over-voltage protection 115%-135
High-temperature protection
Temperature coefficient A 0.03%/0-50
Setup rise hold up time 1s,30ms,15ms
Vibration 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage Input and output internal1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC
Isolation resistance Input and output internal:Input and enclosure,Output and enclosure500VDC/100MIC
Working temperature and humidity -10~+60Refer to output derating curve,20%~90%RH
Store temperature and humidity -20~+85.10%~95%RH
Overall dimension 199A 98A 38mm
Weight 0.62Kgs
Safety standards UL1012 TUV EN6050(IEC950,UL1950)Approved
EMC standards CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification

Note :
1.The testing condition for the paramenter above is :230VAC input,rated load,2570% RH.Humidity.
2.Error.include the setting error,line stability and load stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.