Single Component Tile Adhesive

SINGLE COMPONENT TILE ADHESIVE

Hind Fix TA is ready mix cement based excellent tile adhesive, conforming to IS: 15477-2004.
USES
For the permanent fixing of ceramic and mosaic tiles on walls and floors.
ADVANTAGES
Easy to use, only water to be added
Excellent water proofing characteristics.
Self-curing.
Long working time.
Good mechanical strength.
Usable on a wide range of surfaces

APPLICATION
All surfaces should be sound, clean and free from any contamination like grease, oil, loose particles etc. before
application, the surface and tiles should be pre wetted properly. Hind Fix TA is to be mixed with water in the
ratio of 1: 0.2 parts by weight and stir till a smooth paste is obtained. Allow the paste to stand for 4 to 5 minutes
and stir again. Spread the paste on the surface to a uniform thickness of 3 to 4 mm. With a notched trowel to
remove any trapped air, place the tiles firmly into position by twisting action. Excess adhesive is to be removed
by using damp cloth. Powder should be added to water and not vice versa.

COVERAGE
5 M2/20 Kg bag at 3mm mortar thickness.

MIXING
Mix 1 Kg of Hind Fix-TA with 200 ml of water to get a trowel able consistency for fixing tiles. Water can be
reduced or increased slightly to achieve desired consistency.

PROPERTIES
Mixed Density                   1.65 to 1.75 Kg. / litre.
Powder:Water Ratio         1: 0.2

SHELF LIFE
9 months in unopened condition. The material should be stored under a shed and away from the source of heat.

PACKING
20 Kg. in poly lined HDPE bags or as required.

HANDLING PRECAUTION
Hind Fix TA is non-toxic and ingestion is to be avoided. If contact with eyes occur, wash well immediately
with water and seek medical advice.