Servo Voltage Stabilizer - Oil Cooled, Single And Three Phase, 220v/230v/240v Adjustable Output | Superior Regulation +/- 1%, High Efficiency 97%, Overload Protection

Servo Voltage Stabilizer

We offer a wide range of Servo Voltage Stabilizer.

Description

We generally observe that, AC main supply is never 230 Volt or 415 Volt, but varies from 150 Volt-300 Volt and 300 Volt-500 Volt. It's a very common phenomenon, in India as well as most of the developing countries. The difficulties caused by them are well known, such as Over Load Condition, Line Losses, Poor Power Factor and several other reasons. Generally constant voltage which is required to load is never constant, but in fluctuation manner. It is observed that during the day time, the voltage is quiet low and during the night the Voltage is high then the normal. This fluctuation in supply system results frequent breakdown, low production and also loss of energy. Now the power agencies insist the consumer to fix the capacitor to improve power factor and we get better results in power saving. But Voltage is also important factor to save the power loss. Technical institute and other aspects that illumination (Lighting) is working very efficiently at 220 V AC with minimum power consumption and longer life.

TECHNICAL SPECIFICATIONS

RATING as Per Requirements

INPUT VOLTAGE 170V-290V for Single Phase

300V- 500V, for Three Phase

OUT PUT VOLTAGE 220V/230V/240V Single Phase (adjustable)
380V/415V/440V Three Phase (adjustable)

REGULATION +/- 1% better

TYPE OUTDOOR (Oil Cooled)

COOLING Oil Cooled/Air Cooled

TEMP.RISE (MAX) 60 Deg. Co above ambient.

MOUNTING Wheels 90 Deg.

DUTY CYCLE 100 % CONTINUOUS

EFFICIENCY 97 % Approx.

RATE OF CORRECTION Better than 60V / Sec in Air Cooled Model

RESPONSE TIME Less than 100 milliseconds

OVERLOAD CAPABILITY 10 Minutes for 25% Extra of the Load.

NO LOAD LOSSES less than 0.8 % over entire range

EARTHING Earthing Terminals provided

Metering Volt Meter 96 Size (L&T/Rishab)

SPECIAL FEATURES OPTIONAL

Protection

Over Voltage, Under Voltage, Phase

Failure, Neutral Failure with Time Delay for Both Side.

Fully Solid State IC Control circuit.

No effect of load power factor.

No waveform distortion.

High Efficiency.

Auto / Manual operation facility...

Cable entry box at Input and Output terminals

MCB on Main Side (Schneider)

Duly Painted with Putty & Primer for long life (Color As per requirement)

Earth stud facility