White Refractory Light Weight Silica Insulation Bricks

We are Making, Exporting and Supplying Refractory Light Weight Silica Insulation Bricks in Zhengzhou, Henan, China. Light weight silica insulation brick is also called the siliceous insulating brick, silica is over 91%, the volume density of 1.2 g/cm3 under the siliceous refractory, refractoriness and refractoriness under load is the same as the composition of general silica brick are small, but as a result of porosity, so the compression strength and slag resistance, corrosion resistance and other than ordinary silica brick, and thermal shock resistance is improved.
The lightweight silica brick is made from finely broken silica, and its critical particle size is usually no more than 1mm, among which the particles less than 0.5mm are not less than 90%. Inflammable materials are added into the mix or the porous structure is formed by the method of gas generation.Lightweight silica brick is mainly used for thermal insulation or reduce weight without direct contact with molten material, gas is not subject to erosion, don't suffer from temperature leaps kiln site, use at high temperatures is not easy to contact with basic refraLightweight silicon insulation brick is a kind of heat insulation refractory with the content of SiO2 not less than 91%, which is mainly made of silica.Lightweight silica insulating brick volume density of 0.9 ~ 1.1 g/cm3, thermal conductivity is only half of ordinary silica brick, good thermal shock resistance, the rul start temperature can reach 1600 a , far above the clayey insulating brick.Thus the siliceous insulating brick highest use temperature is 1550 a .It doesn't contract at high temperatures and even dips slightly.
Refractory fire light weight silica insulation bricks are usually made from crystalline quartzite and contain inflammable materials, such as coke and anthracite sawdust, or form porous structures by gas foaming.Similar to the production industry of ordinary silica bricks, some mineralized agents (CaO, Fe2O3) were added into the ingredients to promote the transformation of quartz, and the strength of the bricks was obtained by using the waste pulp as the binder.When coke or anthracite is used as fuel, because ash is carried into Fe2O3 and Al2O3, no additional iron phosphorus is added to the mix.Lightweight silica brick firing, should maintain strong oxidizing flame before 1200 a , make join completely burn out.
The mineral composition of light silica brick is: phosphoquartz 78 ~ 86%, quartz 78 ~ 86%, quartz 78 ~ 86%.The compressive strength of general lightweight silica bricks is 2.0 ~ 9.5mpa, and the thermal conductivity is 0.35 ~ 0.42w /(mA.K).Lightweight silica brick has good fireproof performance, refractoriness under load is close to dense silica brick reached 1620 a above, only a small amount of residual expansion, and its thermal stability is better than dense silica brick.Therefore, lightweight silica brick can be in contact with slag of high temperature 1500 ~ 1550 a under the condition of use for a long time.Table 1 lists the technical conditions of light silicon bricks used in industrial kilns in China.
1533279515(1).jpgctory, according to the different performance, the high temperature at 1350 ~ 1550 a .