Power Transformer - Heavy Duty Copper Wound, +/- 440v/254v Specs | 99% Efficiency, Zero Regulator Losses, Long-lasting Carbon Rollers

Power Transformer

We at POWER-EQUIP assure you that the technology adopted by us is far more superior then the conventional ones resulting in additional advantages and are pleased to give below certain facts to authenticate our claim.

Our regulators are linear type, wound with heavy section copper as against supper enamel wire used in conventional dimmer status. The cross sectional area is almost 3 times and therefore the copper losses are much less. (I2 R ; R = l/A ).

On each regulator coil, carbon roller move on both the sides in opposite direction. The regulators are +/- 440 VOLTS or +/- 254 VOLTS where as the conventional dimmers are straight 254 VOLTS type. Thus our regulator current is less than half in comparison.

Being plus minus types, when the rollers are at their extreme position, the regulator is practically out of circuit and there fore regulator losses are zero. The conventional type dimmers are always in circuit thereby causing losses at every point of time.

In place of carbon brushes which slide on the winding of conventional dimmers causing wear & tear, we use heavy duty carbon rollers which do not need any replacements for at least 15 years.

Owing to the above designs features, the efficiency of our stabilizer is above 99% as against 96% (max) of others. (This fact can be ascertained practically too).