Pneumatic Test Pump

These Pneumatic Test Pumps are available with following specifications:
Pressure range: a. vacuum (-95 to 0)KPa b. Pressure: (0 to 4)MPa
Temperature: (0~50)C
Humidity: < 85%RH
Adjusting fineness: 10Pa
Safety pressure: < 7MPa
Pressure media: Air
Size: (315*198*140mm for ConST117)
Weight: (2.6Kg for ConST117)
Remark: If local atmosphere pressure is 100KPa, the vacuum can reach to -95KPa

If local atmosphere pressure is P, the vacuum can reach to a (95P/100)KPa.
Accessories
Flexible hose, O-ring, adapter, adapter, adapter, plug, spanner

Configuration & Air routine
1. M20*1.5 connector
2. Release valve (clockwise to close/ anticlockwise to open)
3. Isolating valve (isolate the calibration from pressurizing system)
4. Pressure lever
5. Fine adjust handles (clockwise to increase pressure)
6. Security bolt pin (use it to ensure safety)
7. Pressure/vacuum selector (Pressure: pull it out; Vacuum: push it in)