Pneumatic Pressure Pump

We are offering our customers a wide range of Pneumatic Pressure Pump, which are available following Specifications :-
Media: Air.
Generated Pressure Range: 14psi (0.95bar) vacuum to 1800psi (120bar) positive pressure
Pressure Resolution: 10 Pa/ 0.1 mbar
Material:
Ram/adapters: 316 SS;
Body: Steel/aluminum;
Seals: Buna-N.
Test Gage Connection: M20*1.5;
Reference Gage Connection: M20*1.5
Dimensions:
Height: 16.53 inch(130 mm);
Base: 147.64 inch(375 mm) x 124.02inch (315 mm).
Weight: 3.31 lb (7.5 kg).

PRECAUTIONS
1. Please dona t add any oil or water into the pipeline.
2. To avoid damaging the airproof surface, please dona t operate the shut-off valve aggressively.
3. This product can not directly calibrate pressure meters that are used under acid or alkali conditions. If necessary, you must make sure the meters are cleansed by CCl
4 Solvent or melted oil spray to avoid any corrosion damage to the test pump.

MAINTENANCE
Upon final installation of the Model CONST162 Low Pressure Calibration Pump, no routine maintenance is required. A periodic check of system calibration is recommended. The Model CONST1162 is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.