Plug Cord Flexibility Tester

The Plug Cord Flexibility Tester can test six cables or cords fitted with plugs simultaneously. This improves testing capacity. IEC 60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test, the cords need to be rotated 90A . The plug sockets are designed to make this rotation easy and accurate. The ZLT Tester has individual station counters so that any failure data can be retrieved by station.
The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with the cable wiring or accessory connection.
The instrument starts in a vertical orientation and then flexes the specimens 45A on either side of the vertical for a total 90A of flexing. A standard rate of 60 flexing per minute is

used but a slower rate can be selected if desired.
A set of customer selected weights are included with the instrument so that the proper force can be applied to the cable during the test.
Power Supply: 220V 50Hz or 115V 60Hz
Number.of Flex Per Test: 1-999999 (selectable)
Number.of Test Station: 6,individual counts for each station
Rate of Flexing: 10~60 times/min(selectable)
Flexing Angle: Swivel angle on either side for 45A , 60A , or 90A (or 180A )(selectable)
Weight: 10N/20N/133g/284g/500g*6(selectable)
Dimensions: W*D*H=100cm *50cm* 112cm
Conforms to standard: IEC884-1 Figure 21 and clause 23.4,IEC320-1