Piller Type Power Press - Steel Body With 50 Ton Capacity | High Performance, Enhanced Durability, Low Power Consumption, Longer Service Life

Steel body fixed, Inclinable type power press

Frame :

The Piller Type Power Press frame is of all steel construction, fabricated from Rolled steel plates with suitable cross ribbings. Presses up to 30T will be supplied with C.I. legs. proper alignment of the frame is ensured by machining.

Clutch :

The clutch is of pin/rolling key-type. the clutch is rigid and well supported. the clutch gives continuous strokes for mass production.

Crank Shaft :

Crank shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy.

Flywheel :

Properly sized flywheel, is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.

Gears :

Gear are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.

Table & Ram :

Table and ram are made pf high grade heavy duty cast iron & properly seasoned. They are perfectly aligned, to each other to obtain high accuracy & precision press operation.

Lubrication :

An efficient shot lubrication system has been provided for lubricating the sliding surfaces and moving parts. The lubricant is applied by hand pump.

Inclining Mechanism :

Inclinable type presses are provided with inclining mechanism which can be easily set in position by spanners within minutes. The press is so designed that even in maximum inclined position, it is stable under heavy pressing load.

TON CAP

20

20

30

30

50

75

100

150

200

250

CRK DIA

76

76

83

83

95

114

127

152

158

165

STR AD

13-51

13-76

13-63

13-89

13-76

13-102

13-115

13-127

13-152

13-165

SLIDE ADJ

25

25

25

25

40

50

60

60

70

70

HOLE IN RAM

32

32

38

38

51

51

55

55

63

63

HOLE IN BED

89

89

102

102

127

178

191

203

216

216

LxW OF BED

406x508

406x508

457x556

457x556

508x610

610x762

660x813

711x914

762x965

812x1016

DIST BED TO RAM

230

255

266

305

290

330

381

410

432

485

STROKE / MIN

-

-

-

-

-

-

-

-

-

-

D.GEAR(SPM)

50

50

40

40

30

-

-

-

-

-

S.GEAR(SPM)

60

60

55

55

50

40

30

30

30

30

UN GEAR(SPM)

120

120

115

45

-

-

-

-

-

-

H.P./RPM(UG)

2/960

2/960

3/960

3/960

-

-

-

-

-

-

H.P/RPM(G).

2/1440

2/1440

3/1440

3/1440

5/1440

7.5/1440

10/1440

15/1440

20/1440

25/1440

FLOOR TO TOP OF BED

815

815

815

815

900

915

915

915

915

915

WT KG APPROX

800

1050

1000

1300

2000

3100

4600

5650

9000

11500