Pendulum Impact Testing Machine - High Precision Testing For Izod And Charpy Tests | Corrosion Resistant, Digital Readout, Durable Alloy Steel Anvils

Further Details:

The pendulum impact Tester, Model IT 30 is designed for conducting , the test methods confirm to Bs: 131: part 4-1972 (Amended 15 Aug, 1993) BSEN: 10045-2:1993 The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for charpy & the lower one for lzod tasting, on release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the eighth of rise after rupture of the best specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines.)

There are two strikers and one combined support anvil available for fitting in to the pendulum and on the base of the machine for the lzod, chapy test respectively. Changing from one striker to another is achieved simply by fixing the new striker into its position.

Charpy Test
The chirpiest piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports

Izod Test
The izod test is clamped vertically in lzad support fitted on the base of the machine. The support is provided with a machined vertical groove to suit test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of lzod setting gauge supplied