Low Temperature Water Bath - Stainless Steel, Double Walled Design | Automatic Blow Counter, Digital Temperature Control, Safety Thermostat

Low Temperature Water Bath: MTBA -19

It may be defined as the fitted with a compaction rammer with a free fall of 457 mm the rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase.

Features

The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows.
Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction.
HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor.
Reports, Calibration & Test Certificates traceable to national & International Standards.
Temp Control: Digital temp controller housing all the controls switches with PT-100 sensor.
Heaters: S. S. tubular heaters for maintaining of temp.
Construction : Double walled,
Cooling device assembly
PID parameters controlling function
High accuracy and dependability of temperature controlling

Technical Specification

It is a motor driven mechanical compactor useful for compaction into 100 mm dia moulds.
Accuracy : +0.1C to 0.5C
It is fitted with a compaction rammer of 98.5mm dia, weighing 4.535 kg. With a free fall of 457 mm.
The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the test sample. When the rammer reaches the required height the pawl release the rammer which falls freely on test specimen.
Temp. Range : Ambient to 0C TO 100C/ -20C TO 100C/ -30C TO 100C/ -40C TO 100C/ -70C TO 100C
The Compactor is supplied complete with wooden pedestal. Suitable to work on 220V, 50 Hz, AC single phase.