Heat Shrink Cable End Caps - Polyolefin, Varied Sizes, -45 To 105â°c Operating Temp, 2:1 Shrink Ratio, Uv & Ozone Protection, Reliable Sealing
Get Latest Price
In Stock
Product Specifications
| Material | Polyolefin |
| Dimensions | Varied |
| Shrink Ratio | 2:1 |
| Operating Temp | -45 to 105°C |
| Shrink Temp | 110-130°C |
| Tensile Strength | 12MPa |
| Elongation | 300% |
| Features | Fastens wire ends, Guards wire ends, Reliable sealing, High temperature, Consistent seal, UV protection, Ozone protection, Rust protection |
Product Overview
Key Features
Heat Shrink Cable End Caps
The offered Heat Shrink Cable End Cap is utilized to fasten cable ends throughout setting up or at the time of storing, safe guarding wire ends from rust, ozone, UV and many more. At our manufacturing division, our presented hopper is created from the quality guaranteed raw materials and also covered with hot-melt boding agent to make sure dependable seal of wire ends. The offered wire end cap is also severely tested against various parameters by our accomplished quality auditors. We make sure to offer this Heat Shrink Cable End Caps in modified alternatives at most affordable rates.
Features:
- It is used to fasten wire ends at the time of installation or at the time of storing, guarding wire ends against rust, ozone, UV, etc
- It is covered with hot-melt bonding agent to guarantee consistent seal of wire ends
- Uninterrupted operation high temperature ranging from -45 to 105
- The shrink temperature is also varied: initiates at 110, and completed recovered at 130
- Shrink ratio is 2:1
Selection Table:
| Product No. | D/mm | L/mm | W/mm | ||
| As supplied | After recovery | As supplied | After recovery | ||
| WRSFM-11/6 | 11 | 6 | 22 | 0.70.1 | 1.1 |
| WRSFM -16/8 | 16 | 8 | 70 | 1.20.1 | 2.2 |
| WRSFM -20/8 | 20 | 8 | 70 | 1.20.1 | 2.2 |
| WRSFM -25/11 | 25 | 11 | 80 | 1.20.1 | 2.3 |
| WRSFM -32/16 | 32 | 16 | 90 | 1.50.1 | 2.5 |
| WRSFM -50/26 | 50 | 26 | 115 | 1.50.1 | 2.8 |
| WRSFM -70/30 | 70 | 30 | 120 | 1.80.1 | 3.2 |
| WRSFM -100/46 | 100 | 46 | 140 | 1.80.1 | 3.5 |
| WRSFM -120/57 | 120 | 57 | 155 | 1.80.1 | 3.5 |
| WRSFM -140/60 | 140 | 60 | 180 | 2.00.1 | 4.0 |
| WRSFM -250/90 | 250 | 90 | 270 | 2.00.1 | 4.0 |
| Technical Data: | |||||
| Property | Test Method | Typical Performance | |||
| Operation Temperature | IEC 216 | -45 to 105 | |||
| Tensile Strength | ASTM-D-2671 | 12MPa | |||
| Elongation at Break | ASTM-D-2671 | 300% | |||
| Tensile Strength after Aging | ASTM-D-2671 | 10MPa (130,168hrs) | |||
| Elongation at Break after Aging | ASTM-D-2671 | 230% (130,168 hrs) | |||
| Dielectric Strength | IEC 60243 | 20kV/mm | |||
| Stress Cracking Resistance | ASTM-D-1693 | No cracking | |||
| Volume Resistivity | IEC 60093 | 11014cm | |||
| Fungus and Decay Resistance | ISO 846 | Pass | |||
| Longitudinal Shrinkage | ASTM-D-2671 | 10% | |||
| Eccentricity | ASTM-D-2671 | 30% | |||
| Water Absorption | ISO 62 | 0.5% | |||
Company Details
Focusing on a customer-centric approach, J. M. ENGINEERING CO. has a pan-India presence and caters to a huge consumer base throughout the country. Buy Insulation Material in bulk from J. M. ENGINEERING CO. at Trade India quality-assured products.
Business Type
Exporter, Manufacturer, Supplier, Trading Company
Employee Count
10
Establishment
1985
Working Days
Monday To Sunday
Related Products
Heat Shrink Cable End Caps - Polyolefin, Varied Sizes, -45 to 105°C Operating Temp, 2:1 Shrink Ratio, UV & Ozone Protection, Reliable Sealing
J. M. Engineering Co.
Mumbai, Maharashtra
Explore Related Categories
More Products From This Seller
Seller Details
Mumbai, Maharashtra
Proprietor
Mr. Kamlesh K. Sheth
Address
177, Manhar Building, 3rd Floor, Lohar Chawl, Mumbai, Maharashtra, 400002, India
heat shrink end caps in Mumbai
Report incorrect details
