TEXMO H.D.P.E. pipes are best preferred for potable water supply, irrigation schemes, chemicals and edibles transportation, effluent collection and disposal system, submarine and underwater pipe lines, hydro transport system, gas/compressed air system etc.. HDPE pipes for electricity cabling, HDPE Pipe for chemical and Edibles transportation, Pipe for Drainage and Sewage, Pipe for Water collection and Distribution, Telecommunication Cable Ducting, Submarine delivery system.
| | | | TEXMO H.D.P.E. pipes have been preferred over other available resources due to varied salient features | - High corrosion resistance, resulting into a longer life.
- High impact strength.
- Extremely light weight and hence easy to handle.
- High flexibility.
- High abrasion resistance.
- Excellent water hammer characteristics, helps sustaining surges.
- Excellent flow characteristics leading to significant energy saving.
- No exfiltration and infiltration, helps maintaining the quality of fluid being conveyed.
- No trenches needed, resulting into easy and economical installation.
- High UV resistance.
- High resistance to scaling and biological build up.
- High chemical resistance, absolutely inert to any pH value.
- Virtually maintenance free.
| | Applications : | | Industrial : | | | | | | | | | - In petrochemical, paper, dye, paint, cement and other chemical industries for disposal of chemical effluent and waste.
- Oil and milk transportation in industries and dairies
- Discharge of radioactive waste
- Acid and Slurries transportation
- Compressed gas supply at mines and construction sites
- External & internal drainage and sewage
- Salt water handling
| | | | | | | | Agricultural : | | | - Water supply for irrigation in fields
- Drip irrigation scheme
- Sprinkler irrigation
- Insecticide spraying
- Drawing water from pump set for distribution
- Most suitable for submersible pumps and jet pumps.
| | Domestic : | | | For potable water supply in rural and urban areas. | | Other : | | | | - Telecommunication cable ducting
- Bio-gas, coal gas & natural gas distribution lines for domestic and industrial use.
- Air conditioner ducting
- Submarine delivery system
| | | | | Salient Features of HDPE Pipes : | Strong and Durable : | TEXMO H.D.P.E. Pipes are strong, resilient and impact resistant. | | | Light Weight : | Are easy in handling, transportation & installation, even on difficult terrain | | Length as Required : | Are available in straight as well as coil lengths, so less joints & couplers needed. | | Better Flow Characteristic : | There is no deposit formation, so diameter of pipe remains the same and hence better flow. | | Hygienic & Odorless : | There is no contamination as the pipes are resistant to - - Scale formation
- Chemical formation
- Biological formation
| | Energy Saving : | Have smooth internal surface which implies low frictional loss. Hence the power consumption is on lower side. | | Leak Proof : | Are leak proof due to close dimensional tolerance & precision designing and joining. | | Chemical Resistance : | Are totally inert to all the chemicals. | | Economical : | Are reasonably priced and long lasting. These pipes have better flow characteristics so a small diameter pipe can be used. | | Long Lasting : | Are in fact 10 times longer lasting than GI or Rubber pipe. These pipes are free from rusting, weathering & abrasion therefore are an investment for a life time. | | Maintenance Free : | Have no breakage and are unaffected by environmental stress. | |
Comparison of TEXMO range of HDPE pipes with PVC pipes | Particulars | HDPE | PVC | Remarks | Density (gm/cc) | 0.945 -0.956 | 1.40 - 1.46 | Easy handling | Flexibility | High | Rigid (no flexibility) | Easy laying | Length | 6m, 50m, 100m, 300m, 500m or (as per requirement) | 4.5 or 6m | HDPE more suitable for continuous and cost effective installation | Trench | Not needed | Needed | Lower installation cost | UV stability | Excellent | Moderate | Better life | Continuous use temperature | - 50 C - 80 C | -5 - 60 C | - | Vicat softening temperature | 125 C | 80 C | - | Decomposition temperature | 360 C | 160 C | - | Impact Strength | Excellent | Good | - | Chemical resistance | Very good | Good | - | Surge pressure | High | Moderate | - | Power cost | Low | Higher than HDPE | Saves energy | Reuse of pipes | Easy | Inconvenient |
| Installation | Easy and quick | Requires extra skill and time | Saves time and money | Joining | Easy and quick | Requires extra skill and time |
|
Comparison of TEXMO range of HDPE pipes with GI pipes | | HDPE | GI | Length | TEXMO HDPE pipes are flexible and can be coiled. User gets single pipe as per his requirements. Hence no/ less joints. Coils are available in different lengths. | GI pipes are available in 6 m length. Threading is required to join pipes which is laborious, expensive and time consuming. | Size and Pressure | Wide range from 20mm to 630mm sizes with 2.5 to 16 kg/cm pressure rating. | Limited range compared to HDPE pipes. | Corrosion | Possesses excellent corrosion resistance to water, acids & alkalies. | Corrodes faster specially in water submergence. | Internal Surface | Smooth surface offers very low frictional resistance. Resistance to encrustation/ abrasion. | Offers resistance to flow due to less smoother surface which gets worse due to corrosion over a period of time. | Flexibility | Can take curvature up to a radius 25 times the pipe dia. hence can be coiled. | No flexibility. Can be used in straight length. | Weight | It is approx. 4 to 5 times lighter then GI pipes for applications like suction & delivery pipes. | Heavier than HDPE pipe, so it is costly is transportation, installation & manpower. | Maintenance & Life | Virtually maintenance free. The joints are 100% leakproof. Have a long life. | Requires maintenance frequently. Life is not more than five years. | Installation | Easy, as no special equipments are required. Submersible pump can be installed in 1 hour time for depth more than 80m to 100m. | Cumbersome. Chainpully required apart from holding clamps. Takes almost 5 to 8 hours depth of 80m to 100m. | Cost | Unit cost of delivered water is approx. 15 to 20% lower than GI iUpto110 mm size | Unit cost of delivered water is more in GI pipes as compared to HDPE pipes. |
Energy saving with HDPE Pipe as compared to CI pipes | S.N. | Particulars | C.I. | H.D.P.E. | 1 | Velocity (m/sec) | 1 | 1 | 2 | C value (Hazen williams formula) | 110 | 150 | 3 | ID of Pipe (mm) | 200 | 197 | 4 | Length of Pipe (m) | 4000 | 4000 | 5 | Head Loss in 4000 meters | 29.0 | 17.0 | 6 | Static Head (m) | 12.0 | 12.0 | 7 | Suction Head (m) | 6.0 | 6.0 | 8 | Total Pressure Drop (m) | 47.0 | 35.0 | 9 | Recommended Pump (hp) | 30 | 20.0 | 10 | KW Required | 22.0 | 15.0 | 11 | Power per year in KWH based on 10 hour Pumping per day | 80300 | 54750 | Energy Saving Per Annum - 25550 units |
| Product Range : |
| - TEXMO HDPE pipes are available in sizes ranging from 20 mm - 200 mm in 2.5, 4.0, 6.0, 8.0, 10.0, 12.5 and 16kg/cm pressure rating.
- Sizes ranging from 25 mm to 110 mm for suction, submersible and jet pump applications. Pressure class depends upon the depth of the bore.
| Recommendations | Depth of the bore in mtrs | Pressure classs | Upto 55 mtrs | 4.0 kg/cm ID | Upto 90 mtrs | 6.0 kg/cm | Upto 140 mtrs | 10.0 kg/cm | Upto 170 mtrs | 12.5 kg/cm | Length / Packing | Size Range | Length | 20 mm to 50 mm | 100m, 200m, 300m, 500m coils | 63 mm to 90 mm | 100m, 200m coils | 110 mm to 630 mm | In strength length of 6m | | | |
|
|
| | |
