Drip Pipes

3

4

4

290.0 INR (Approx.)

1150 INR (Approx.)

10.0 INR (Approx.)

2-8 LPH (Liters per Hour), depending on pressure and emitter

2 kg/cm2 To 20 kg/cm2

Dependent on system design and layout

6mtr Square Centimeter (cm2)

Other, Polyethylene (PE)

PVC

Plastic

Water Supply in Irrigation

Micro Irrigation

Agricultural/Irrigation

300

1000 Per Day

1000 Per Day

800000 Per Year

Seamless

Seamless

Yes

No

1 Roll pack

Packing details for Lateral HDPE (High-Density Polyethylene) pipes can vary depending on the pipe size, length, pressure rating, and manufacturer. However, there are standard practices commonly followed in the industry to ensure safe transportation and storage. HDPE Pipe Packing Details:1. Bundling:Small diameter pipes ( 20mm to 110mm) are usually bundled in coils.Common coil lengths: 50m, 100m, 200m, up to 500m depending on the diameter.Bundles are tied using plastic straps or polypropylene ropes.Wrapped in LDPE stretch film or woven bags to protect from UV and damage.Larger diameter pipes ( >110mm) are straight lengths.Typically 6m or 12m straight pipes.Packed in bundles of several pipes per bundle (number depends on pipe diameter).Bundles are secured with nylon or metal straps.Ends are often capped with plastic end caps to prevent dust and damage.2. Wooden Supports or Pallets:For export or long-distance transportation, wooden crates or pallets may be used to stabilize the bundles.Blocking and bracing is done to avoid shifting during transit.3. Marking and Labeling:Each bundle or coil is labeled with:Pipe size (OD, wall thickness)Pressure rating (PN2.5., PN10, PN16)Material grade (PE63., PE100, PE80)Standard followed ( ISO 4427, DIN 8074)Manufacturing date, batch number, and manufacturer's name/logo4. Protection:UV-resistant wrapping (especially for outdoor storage).Pipe ends sealed or capped to avoid contamination.5. Container/Truck Loading:Pipes are stacked carefully in layers to optimize space.Heavy pipes at the bottom, lighter on top.Use of dunnage to separate layers and avoid deformation.

Subsidy

IS 4984:2016, IS 14333:1996, IS 14151(Pt-2):2008, DIN 8074, DIN 8075, ISO 4427.