Copper Scrap Continuous Casting And Rolling Line

Salient Features of Copper Scrap Continuous Casting And Rolling Line :-
This copper rod continuous casting and rolling line takes copper scraps as the feedstock to produce copper rod in 8mm diameter, with annual capacity varying from 6,000 to 12,000 tons.

This casting machine has the following superiorities:
1) Easy to change the steel belt, which can be replaced without the need to hoist away the operation platform;
2) Long life of belt as it can be used for over 6 hours;
3) Easy to change the casting mould as the casting wheel can be dismantled as a whole piece. By turning the moveable guide bridge, its possible to hoist the casting wheel to change it quickly;
4) Optimized in transmission construction without the use of a large toothed ring. Inner gears are used inside for transmission, getting rid of the problem when the casting wheel is blocked by copper dust, which used to occur very often.
5)Easy to clean the copper chips. Good consideration is given I design on the difficulty to clean the copper chips;
6)As the tundish can move up and down, its very easy for it to work and stop at the time of start and stop. Its possible to start or stop casting any time;
7) The tundish is in simple construction, easy to control the flow rate. With two spouts, its able to hold the temperature of copper melt, and possible for the user to fit a thermocouple to display the temperature of the copper melt;