Computerized Cooling Tower Test Bench - Stainless Steel 40x40 Frame Structure, 110mâ² Specific Surface , Fully Automatic Touch Screen Control, Remote Daq System

Total Equipment is skid mounted in SS 40 x40 Frame Structure with Castor wheels. All wetted parts also made of SS-304
Cooling column
Specific surface of the wet deck surface: 110m2/m3
Cross-section: 150x150mm
Volumetric airflow measurement via orifice: 80mm
Heater, adjustable in three stages:
500W
1000W
1500W
Thermostat: switches off at 50C Fan
Power consumption: 250W
Max. Pressure difference: 430Pa
Max. Volumetric flow rate: 13m3/min Pump Max. Head: 70m
Max. Flow rate: 100L/h
Tank for additional water: 4,2L
Measuring ranges
Differential pressure: 0-1000Pa (air)
Flow rate: 12360L/h (water)
Temperature: 2x 0-50C, 3x 0-100C
Rel. humidity: 10-100%
Required for operation
230V, 50Hz, 1 phase Touch screen based Fully automatic system with password protection Data acquisition should be Remotely operated by Smart phone, Tablets, PC, laptops via Ethernet and Wi-fi
Should be equipped with all safety protections Flow visualization should be available in the DAQ System Should be equipped with both manual and auto operation Power consumption of individual system, all sensors data should be display and logged automatically System should have software for operating, data logging, processing and data displaying
Performance variables (e.g., Heating/Cooling COP, Heating / Cooling load etc..) should be automatically calculated and displayed and should be stored in pen drive also along with PC. Instruments should be provided with 3D drawing of complete equipment along with the name and make of all standard components used in the test rig Each rig should have small aesthetically appealing poster with schematic diagram and basic working detail.