Recirculating Type A.c. Trainer

Complete Ducting made of PC or Acrylic to visualise and identify the components in working
Mixing dampers: Mixing dampers with electrical actuator and position indication. The system includes 3 dampers : outdoor air, mixing air and exhaust air
Total Equipment is skid mounted in SS 40 x40 Frame Structure with Castor wheels. All wetted parts also made of SS-304
Total Equipment is skid mounted in SS 40 x40 Frame Structure with Castor wheels. All wetted parts also made of SS-304
Compressor: - Hermetically sealed compressor having cooling capacity of (1 ton) Emerson or Equivalent.
Condenser: Air cooled condenser made up of copper pipe & Aluminum fins of matching capacity with fan cooling. FHP fan motor with fan blade is provided. Storage room: - 100 mm X 800 mm X 1000 mm Storage room with double wall insulated with suitable small door. Evaporator: - Air passed Evaporator made of copper pipe and aluminums fins of matching capacity with fan cooling.
Expansion device:
Capillary Tube
Diameter: suitable; Material: copper
Rota meter: For measuring flow rate of liquid refrigerant.
Capacity: 0 to 100 LPH.
Pressure Gauges:
0 to 500 PSI (R-22); Compound Gauge -30 to 150 PSI (R-22)
HP/LP cut-out: Danfoss or equivalent. Refrigerants: Primary R-22 gas.
Service valve: 1 no. Brass type.
Filter / Drier: 1 nos. Danfoss or equivalent make.
Thermostat: Ranco make or equivalent
Single phase 230 V AC, 15 Amp supply Touch screen based Fully automatic system with password protection
Data acquisition should be Remotely operated by Smart phone, Tablets, PC, laptops via Ethernet and Wi-fi
Should be equipped with all safety protections Flow visualization should be available in the DAQ System
Should be equipped with both manual and auto operation Power consumption of individual system, all sensors data should be display and logged automatically System should have software for operating, data logging, processing and data displaying Performance variables (e.g., Heating/Cooling COP, Heating / Cooling load etc..) should be automatically calculated and displayed and should be stored in pen drive also along with PC.
Instruments should be provided with 3D drawing of complete equipment along with the name and make of all standard components used in the test rig
Each rig should have small aesthetically appealing poster with schematic diagram and basic working detail.