Ajinkya 4x-42 Cnc Turning Machine - Mild Steel, 160 Mm Horizontal Size, Blue | High Speed, Low Energy Consumption, Automatic, High Rigidity, Servo Driven, 4 Axis Operation

Brand : Abhijat
Bed Size : 160 mm
Layout : Horizontal
Weight : 2800 Kg
Frequency : 50 Hz
Phase : Three Phase
Number Of Axis : 4 Axis
Driven Type : Servo
Voltage : 415 V
Accuracy : 100%
Material : Mild Steel
Automation Grade : Automatic
Type : Multi Axis Automatic
Chuck Diameter : 135 mm
Max spindle RPM : 4000
Spindle Motor Power : 5.5 kW
Max Turn Length : 160 mm

Ajinkya 4X-42 CNC Turning Machine
This is a 4 axis Linear tooling turn mill lathe, the most economical alternative to a turret type C axis lathe. The tooling system comprises of 4 turning, 4boring & 6 live tools, giving a total capacity of 16 tools.
It's unique design allows rapid chip to chip time. Its design enables reduction in cycle times.

About 25% of processing times can be reduced and the economical efficiency of the machine is increased. The rigid design of machine allows heavy duty cutting to be performed.
6 Live tool spindles with both C axis & Y axis can complete most complex work piece in single setup.
The 90 vertical design of slide enables direct chip fall into chip tray without any accumulation on slide.


Structure
The machine base, slides are ribbed rigidly to impart stability & robustness They are accurately machined & ground for optimum performance, minimum distortion, superior vibration control, cutting stability. The machine is ergonomically designed to provide easy access to working area, operation panel Well dimensioned spaces for flow of chips and circulation of cutting fluids is provided.



Tooling System
The gang tooling system allows fast chip to chip time as the travel of tool is very less while changing tool position.
The addition of Y axis allows complex 'off centre' milling operations to be done, and with full C axis control many complex shapes can be machined.
Thus the machine can be used as turn mill centre. Tool holding of the live tool is made by ER20 collets enabling the use of economic standard tools.
The slide have X, Y & Z axis movements & hence drilling or milling on face, drilling or milling on PCD, drilling or milling on diameter, Spanner fiat on shaft diameter, helical grooving, polygonal milling, square or hexagonal shape cutting are easily possible on machine.


Spindle
The cartridge type case hardened alloy steel spindle runs on P4 high precision bearing giving high radial and axial forces to be carried, allowing for heavy duty cutting. Oil is circulated in headstock for better cooling effect of spindle. The spindle is assembled and tested in a temperature controlled clean room, sealed, and requires no maintenance. The spindle housing has a symmetrical design and is large to allow heat dissipation and thermal stability.


Linear Guide ways
The machine is equipped with high precision, imported liner guide way.
The use of 35 mm rails increases stability, accuracy and allows heavier cuts to be taken.

CNC System
No of axis- 5 nos X, Y, Z, C, rotary tools
Manual Data Input
Part programme storage and Editing
Constant Surface speed control
Thread cutting cycles
Linear, Circular interpolation
Backlash Compensation