Base Coat Plaster

Our provided Base Coat Plaster is ready mix gypsum based plaster suitable for application of internal plastering system. It can be applied directly over the brick / block and concrete surface to eliminate sand cement plaster and finish plaster as pop / putty etc. It consists of gypsum hemihydrates formulated with special additives to enhance working and setting characteristics. It contains light weight aggregates to improve plaster's workability coverage and application. This product is available in 25 kg packing in HDEP with powder form.

Features:
. Pre mixed plaster and ready to use (Mix water at site)
. Can be directly applied on to the brick / block wall or concrete surface.
. No post curing thus is required.
. Faster working thus time saving.
. No shrinkage cracks to be appeared on surface.
. High quality finish suitable to desired decoration / painting.

Performance Driver:
Initial setting time (min) - 15-20.
Final setting time (min) - 20-25.
Coverage (m2 / T for 13 mm) -65.
Dry bulk density (kg / m3) -730

Application methodology:
1 .The surface should pre-wet and removed all loose particles before plastering.
2 .Mix base coat plaster to water in water plaster ratio as 1:2, use steering wheel to get required plaster for plastering and avoid lumps.
3 .The surface to be plastered, prepared with bulk mark / level strip properly to maintained correct line level and right angel of the room.
4 .To fill the plaster paste through trowel to require leveling the surface.