Avr Programmer T51prog2

AVR Programmer T51Prog2MCS51 series and Atmel AVR microcontrollers ISP capable fast programmer Features11113 Supported devices from 152 manufacturers Small, very fast and powerful portable programmer of MCS51 series and Atmel AVR micro controllers In-circuit serial programming (ISP) capability included Program also serial EEPROMs DIL40 ZIF socket, all MCS51/AVR chips in DIL package up to 40 pins are supported without adapters Connection to PC: USB port USB 2.0 full speed and USB 1.1 compatible Upgradeable to SmartProg2 programmer. Comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista compatible compatible Free SW update, download from Internet Power supply, cable and software included Made in Slovakia Approved by CE laboratory to meet CE requirements GeneralNew generation of Windows 98/Me/NT/2000/XP/2003/XPx64/Vista based ELNEC specialized programmers. Programmer is capable to support all currently available microcontrollers of the MCS51 series (up to 40 pins) and the AVR microcontrollers (8-40 pins) using parallel and serial algorithms. T51prog2 has been developed in close cooperation with Atmel W&M. therefore programmer's hardware is focused to support all current and future microcontrollers of Atmel W&M MCS51 family. T51prog2 is a small, very fast and powerful portable programmer for MCS51 series and Atmel AVR microcontrollers. T51prog also programs serial EEPROM with IIC (24Cxx), Microwire (93Cxx) and SPI (25Cxx) interface types. Using build-in in-circuit serial programming (ISP) connector programmer is able to program MCS51 family microcontrollers and Atmel AVR microcontrollers using serial algorithms. Provides very competitive price with excellent hardware design for reliable programming. Nice "value for money" in this class. Very fast programming due to high-speed FPGA driven hardware and support of high-speed USB port. Surely faster than competitors in this category. T51prog interfaces with the IBM PC compatible or higher, portable or desktop personal computers through USB port. T51prog2 is easy upgradeable to SmartProg2 programmer using "upgrade kit Xprog2 to SmartProg2" (ord.no. 60-0048). Hardware40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices. The programmer performs device insertion test (wrong device position in socket) and contact check (poor contact pin-to-socket) before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error. T51prog2 programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention. Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSSOP, TQFP, QFN (MLF) and other packages. SoftwareProgrammer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number. Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement). All known data formats are supported. Automatic file format detection and conversion during loading of file. The rich-featured autoincrement function enables one to assign individual serial numbers to each programmed device - or simply increments a serial number, or the function enables one to read serial numbers or any programmed device identification signatures from a file. The software also provide a many information about programmed device. As a special, the drawing of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip. The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design around in-circuit programmed chip and other necessary information. Technical SpecificationHardwareProgrammerTwo D/A converters for VCCP and VPP, controllable rise and fall time VCCP range 2V..7V/350mA VPP range 2V..25V/200mA USB 2.0/1.1 compatible interface Autocalibration Selftest capability ZIF socket, pindriver40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins pindriver: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver for MCS51 and AVR devices FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins, level H selectable from 1.8 V up to 5V Continuity test: each pin is tested before every programming operation ISP connector10-pin male type with missinsertion lock 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices. 1x VCCP voltage (range 2V-7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA) programmed chip voltage (VCCP) with both source/sink capability and voltage sense (*1) - the programmer is not capable to supply a target system from VCCP pin. If you have such demand, use please a BeeProg+ programmer Programming speed Device Operation Time AT89C52 programming and verify 15 sec. T87C5111 programming and verify 14 sec. Conditions: P4, 2.4 GHz, USB high-speed, Windows XP.