Memory Programmer Memprog2

Memory Programmer MEMProg2Features 12758 Supported devices from 187 manufacturers Small, fast and powerful programmer of EPROM, EEPROM, Flash EPROM, NVRAM and serial EEPROM DIL40 ZIF socket, memories in DIL package up to 40 pins are supported without adapters Connection to PC: USB port USB 2.0 full speed and USB 1.1 compatible Upgradeable to SmartProg2 programmer. Comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista compatible Free SW update, download from Internet Power supply, cable and software included Made in Slovakia Approved by CE laboratory to meet CE requirements GeneralMEMprog2 is the next member of Windows 98/ME/NT/2000/XP/2003/XPx64/Vista based ELNEC specialized programmers. Programmer is built to meet the demands of development labs and field engineers for a specialized memory programmer. MEMprog2 supports virtually all memory types - EPROM, EEPROM, NVRAM, Flash EPROM and serial EEPROM - including low voltage types. MEMprog2 isn't only a programmer, but also a static RAM tester. Provides very competitive price with excellent hardware design for reliable programming. Offer pleasant "value for money" in this class. Very fast programming due to high-speed FPGA driven hardware and support of high-speed USB port. MEMprog2 interfaces with the IBM PC compatible, portable or desktop personal computers through USB port. MEMprog2 is easy upgradeable to SmartProg2 programmer using "upgrade kit Xprog2 to SmartProg2" (ord.no. 60-0048). Hardware40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices. The programmer performs device insertion test (wrong device position in socket) and contact check (poor contact pin-to-socket) before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error. MEMprog2 programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention. Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSSOP, TSOP and other packages. SoftwareProgrammer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help. Selection of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number. Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement). All known data formats are supported. Automatic file format detection and conversion during loading of file. The rich-featured autoincrement function enables one to assign individual serial numbers to each programmed device - or simply increments a serial number, or the function enables one to read serial numbers or any programmed device identification signatures from a file. The software also provide a many information about programmed device. As a special, the drawing of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip. Technical SpecificationHardwareProgrammerTwo D/A converters for VCCP and VPP, controllable rise and fall time VCCP range 2-7V/350mA VPP range 2-25V/200mA USB 2.0/1.1 compatible interface Autocalibration Selftest capability ZIF socket, pindriver40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins Pindriver: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins, level H selectable from 1.8 V up to 5V Continuity test: each pin is tested before every programming operation ISP connector (useable after upgrade to SmartProg2 programmer only)10-pin male type with missinsertion lock 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices. 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA) programmed chip voltage (VCCP) with both source/sink capability and voltage sense (*1) - the programmer is not capable to supply a target system from VCCP pin. If you have such demand, use please a BeeProg programmer  Programming speed Device Operation Time 27C010 programming and verify 23 sec. AT29C040A programming and verify 31 sec. AM29F040 programming and verify 60 sec. Conditions: P4, 2.4 GHz, USB high-speed, Windows XP.