Tile Adhesive - Save-it 301 Grey Cementitious Powder, Water Resistant, High Adhesive Bond Strength, Easy To Use, Interior And Exterior Applications

Tile Adhesive

Relying on our wide experience and skills in this field, we are noted as one of the most prestigious manufacturers and traders of Tile Adhesive. We do not compromise with the quality of offered range, so we procure quality components from certified vendors of the market. Owing to our client centric approach and quality range of Tile Adhesive, we have carved top-notch position in this domain. Due to their water resistance, high adhesive bond strength and easy usage attributes, these adhesives are widely used in various construction work.

Further details:

Tile Adhesive

We offer a wide range of Tile Adhesive.

Description

SAVE- IT 301 is a grey cementitious powder formulated as a high performance fixing adhesive for a wide range of heavy duty applications.

Mixing instructions

Add SAVE- IT 301 to cool, clean water at the following rates:

By weight 5:1, Volume 2.5:1. Mix to a uniform lump free consistency and allow to stand for 5 minutes before use.

Primary uses

Ceramic wall and floor tiles, terrazzo, quarry tiles and stone cladding in interior and external applications. SAVE- IT 301 may be employed with confidence in institutional or high traffic conditions. SAVE- IT 301 is suitable for use in kitchens, showers and wet process areas. For swimming pools, fountains, wet storage vessels and conditions of permanent submersion use SAVE- IT 301 H.

Application instructions

Apply SAVE- IT 301 to a uniform thickness of 3 to 6mm or sufficient to cover the studs or keys on the tile back; on a working area of not more than 1 mA A A a A a Aca a cA A A AcA AcAca A A A A a A A A A A a A AcAca A A A A A Aca A A a A A . Solid bed fixing is recommended for all horizontal applications and for ceramic, quarry, terrazzo and marble flooring tiles, and vertical heavy duty applications including artificial stone cladding. If preferred, SAVE- IT 301 can additionally be buttered on the backs of the tiles to ensure full adhesive contact. For all other vertical applications the adhesive bed should be combed horizontally with a notched trowel to remove excess.

Advantages

Direction for use

Adjustments to tiles should only be made during the adhesives open time.

Surface preparation

All surfaces must be clean, dimensionally stable, sound and free from all traces of oil, grease, mould release agent and curing compound. SAVE- IT 301 may be used as a thin section render to even out irregularities in the substrate to a maximum depth of 12mm. This must be conducted as a separate operation; the SAVE- IT 301 render permitted to cure adequately before tiling commences. Concrete, screeds, renders, and block work should be cured sufficiently that all shrinkage movement has occurred. Remove excess adhesive from the face of the tile with a damp sponge or cloth before it sets. Similarly, joints must be raked out in readiness for grouting. Leave for a minimum of 24 hours before grouting. Select the appropriate grout for joint size and in service use from the SAVE-IT range.

Yield

20kg bag mixed with 4 litres of water yields 13.0 litres of mixed adhesive.

Technical Data/Typical properties

Colour: Grey

Bulk density : 2.0

Plastic density: 1.85

Packaging

SAVE- IT 301 is available in 20kg bags.

Storage

Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

Disclaimer

Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any labour involved in the application are beyond our control.