White Acrylic Wall Putty - Eco-friendly Formulation, Smooth Finish For Seamless Interiors, Non-toxic With Excellent Adhesion Properties

Incepted in the year 2003, we are engaged in manufacturing
and exporting a superior range of White Acrylic Wall Putty. These
putties are processed from best quality mineral fillers, biocides,
organic adhesive and blinder at our state of the art machining facility. Our White
Acrylic Wall Putty is used for filling blemishes, cracks & holes on masonry
surface and gives smooth & shining surface to the
walls. Our clients can avail these putties from us at a reasonable price.

Features:

• Precise composition
• Eco friendly
• Excellent adhesion property

• "White Coat" comes in a paste form. Hence, there is no need To dilute with water.
• Before application of paint it dose not require primer and reduce paint consumptions.
• Even and smooth finish against any other surfacing products.
• "White Coat" resists fungus growth, and allows Water vapors to escape without causing blistering.

• Cement / Sand Rendering
• Concrete / lime / sand rendering
• Concrete / Bricks and blocks
• Precast concrete surface
• Asbestos cement sheet
• Plywood / Gypsum plaster boards

• Before application of "White Coat" remove all loose particles, mould oil and cavities from wall. It should be applied directly on the interior walls / surfaces with putty knife.
• Thickness of the coat must not be more than 1mm. Leave 1st coat to dry properly and than apply 2nd coat also of 1mm thickness.
• Very smooth surfaces do not require second coat. "White Coat" takes about 3-4 hours to dry before applying 2nd coal. Leave 8 - 10 hours after applying 2nd and final coat.
• Then gently rub "0" number sand paper or a fine emery paper in circular movement on it. Remove the dust by clean cloth and apply any paint directly on "Wheat Coat". The stains of "White Coat" can be cleaned with water.