Wastewater Clarifier Equipment - Central Driven Mechanism, 500mm Free Board, Mild Steel Rake Arms With Chequered Plate Walkway

Wastewater Clarifier Equipment - Centrally driven Clarifier mechanism, suitable for installation in your R.c.C Tank of suitable diameter, SWD and 0.50 meter generally as per the details given below:-

* Free board would be 500 mm
* The mechanism would be Central driven type, with the bridge spanning the tank radius, one end over the tank and the other a Center mechanism cum turn table in the Center Pier. The feed may be bought into the tank thought this pier.
* Integral gear cum worm drive type turn table resting over a mild steel base frame on the RCC center pier ( S type)
* Walkway cum driving bridge of 1000mm wide with 1 meter hight hand railings and 5 mm thick chequered plate walkway for the full length of bridge.
* Main drive consisting of a center mechanism with internal gears through which the scraper cage is hung. This internal gear in turn is run by a A type worm drive head with drive pinion on output end.

Prime mover for rake arms consisting of :

* Motor of Crompton make with IP 55 protection
* Gear reducer of Greaves make coupled to the motor through Lovejoy coupling
* Driving sprocket with required chains
* Chain guard

This bridge rests over the Main center mechanism and the scraper is hung from the internal gear.
* Mild Steel scraper Rake Arms fixed to the cage suspended from the center mechanism holding the scraper frames, two numbers, with blades bolted to the same.The arms would be truss type fabricated.