Thermic Fluid Heater - Double Coil, Three Pass Design | Non-pressurized Operation, Automatic Control Settings, High Thermal Efficiency

We are Making, Exporting and Supplying of Thermic Fluid Heaters in Delhi, India. In recent times, thermic fluid heaters have found wide application for indirect process heating. Employing petroleum - based fluids as the heat transfer medium, these heaters provide constantly maintainable temperatures for the user equipment. The combustion system comprises of a fixed grate with mechanical draft arrangements.
The modern oil fired thermic fluid heater consists of a double coil, three pass construction and fitted with modulated pressure jet system. The thermic fluid, which acts as a heat carrier, is heated up in the heater and circulated through the user equipment. There it transfers heat for the process through a heat exchanger and the fluid is then returned to the heater. The flow of thermic fluid at the user end is controlled by a pneumatically operated
control valve, based on the operating temperature. The heater operates on low or high fire depending on the return oil temperature, which varies with the system load
The advantages of these heaters are:
a cClosed cycle operation with minimum losses as compared to steam boilers.
a cNon-Pressurized system operation even for temperatures around 250 0c as against 40 kg/cm2 steam pressure requirement in a similar steam system.
a cAutomatic control settings, which offer operational flexibility.
a cGood thermal efficiencies as losses due to blow down, condensate drain and flash steam do not exist in a thermic fluid heater system.