Stenter - Hot Air Circulation, 2000mm Nominal Width, 8 Chamber Design | Automated Weft Straightening, Infra-red Edge Control, Thermo Oil Heat Source

This Stenter is designed for stentering or thermosetting woven or knitted fabrics (70-500G/M2) made of cotton, polyester etc.

Detailed Description:
This stenter is designed for stentering or thermosetting woven or knitted fabrics (70-500G/M2) made of cotton, cotton / polyester or other blended fibers.

1. Process Flow
(1) Cylinder dryer: Open width entering-screw expanding and centering device-slant padder -cylinder drying(10PCS) -plaiting

(2) Heat-setting stenter:
Open-width feeding- screw expanding - centering -automatic weft straightening(buyers supply, leave space for this device) -lower overfeeding -mechanical weft straightening -screw expanding - upper overfeeding -four- finger selvedge uncurling -infra-red edge controlling -pinning- stentering or thermosetting-air cooling -depinning - water drum cooling -plaiting

3. Main specifications:
3.1 Type: Hot air circulation, single layer horizontal
3.2 Hand: Left or right hand
3.3 Nominal Width mm : 2000
3.4 Adjusting Width mm : 700 - 1800
3.5 Nominal Speed : 10-100m/min
3.6 Overfeeding Range : -10%+30%
3.7 Temperature in Chamber : 100220
3.8 Heat Source thermo oil
3.9 Fabric Held by Pins(climb type)
3.10 Delivering Plaiting
3.11 Edge controlling: Red- infrared edging sensor
3.12 Guide rail non lubricated steel tracks
3.13 No. Of chamber 8 chambers (each is 3 meters long
3.14 With Seimens PLC and FUJI inverter