Zinnor Oxygen Concentrator Generator - Abs Material, 358x231x321mm, Silver Color | High-quality Filtering, Remote Control, Mute Design, Adjustable Flow

Product Name: Zinnor Oxygen Concentrator Generator
Product Origin: USA
Shell Material: ABS
Color: Silver
Cable Length: 150cm/59.06''(approx.)
Size: (L) x (W) x (H) 358 x 231 x 321mm/14.09'' x 9.09'' x 12.64''(approx.)

Features:
Brand New and high quality.
1) Excellent filtering performance.
2) Add shockproof mat, more secure.
3) Timing function. With LCD screen.
4) Small volume, convenient to carry.
5) Intelligent remote control, convenient to use.
6) Mute design more comfortable, less than 45 db.
7) Bacteria filter oxygen, more safe. Oxygen stable.
8) Concentrations up to 90%, the flow can be adjusted from 1L to 5L.

Operation Guide:
1. Unpacking Operation
a) open the oxygen machine outside of the box, and check the machine parts.
b) cut the tie and bottom of the machine and removed, otherwise the machine has abnormal vibration and noise.
c) open the water tank panel, remove the wet cup.
d) to add pure water to the wet cup (note: water injection is maintained within the water level line)
e) put water bottles and wet cup back to the machine and fasten.
f) installed water tank panel.
2. Boot Operation
a) machine power cord and machine power supply jack, pull out when not in use.
b) connect the power cord to the outlet with the power output.
c) open the machine power switch, the power indicator light is light, pull out when not in use.

3. Oxygen Inhalation Operation
a) Switch
After the machine is switched on, the power switch is turned on the back of the machine, and the machine power indicator light is bright.
b) Oxygen
In the energized state, press the a oxygena button, oxygen making machine begin to work.

4. Time Setting
Timing
According to a a timinga button to the unit 15 minutes increments count, the maximum time of 2 hours, 2 hours full automatic. Cycle, timing is set to -- when the machine is in continuous operation state.

5. Flow Setting
a) Electronic flow regulation point touch control panel on the a flowa key, modulation of the required flow, and the display and the flow of the corresponding oxygen concentration. At the same time through the water tank lights can be seen bubbles emerge, wetting the cup of oxygen port with oxygen output. This machine is equipped with adjustable flow 5 cycle.
b) Mechanical flow regulation rotary flow control knob to the desired flow. The adjusting knob counterclockwise as the flow increases, the clockwise rotation for the part, at the same time flow is reduced, wet bottle filter should be around bubbles, oxygen export output panel. Connect the oxygen tube one end to the other end and patients wear. Time and flow of oxygen inhalation, please follow the doctora s advice.

6. Negative Ion Operation
Touch the negative ions on the control panel to open and close the negative ions.
Package Includes:
1 x Oxygen Generator
1 x Oxygen Tube
1 x Nasal Suction Oxygen
1 x Power Cord (US Plug)
1 x Remote Control
1 x Earphone Type Oxygen Inhalation Device
1 x Instructions